Laser-based ultrasonic (LBU) measurement shows great promise for on-line monitoring of weld quality in tailor-welded blanks. Tailor-welded blanks are steel blanks made from plates of differing thickness and/or properties butt-welded together; they are used in automobile manufacturing to produce body, frame, and closure panels. LBU uses a pulsed laser to generate the ultrasound and a continuous ...

the forming limit diagram (fld) is a useful method for characterizing the formability of sheet metals. in this paper, different numerical models were used to investigate the fld of tailor welded blank (twb). twbs were co2 laser-welded samples of interstitial-free (if) steel sheets with different thicknesses. the results of the numerical models were compared with the experimental fld as well as ...

Formability of Tailor Welded Blank (TWB) is an important parameter which limits this kind of blanks usage. A forming criterion for tailor welded blank is presented based on the analytical model in this research. This criterion suggests Limit Strength Ratio (LSR) and Limit Thickness Ratio (LTR) for forming limit of TWB. When thickness ratio or strength ratio in tailor welded blank is greater tha...

As popular aluminum alloys, the 5xxx Al-Mg series, such as 5050 and 5052, etc., are widely used in applications such as automobile, pressure vessels, armor plate, and components for marine and cryogenic service. In this, as in all non-heat-treatable aluminum alloys, the weld metal zone is considered to be the weakest part of the joint and is the location of failure when the joint is loaded in t...

During the weld defect detection, the heat transfer characteristics are closely related to the material properties of welded structure. Based on the electromagnetic induction infrared thermography technology, the heat transfer Characteristics of the welded material are studied with the changing temperature. By using the finite element analysis software COMSOL, the eddy current density and tempe...

The 700 °C power plants currently under development will utilize Ni-base alloys such as alloy 617 for components to be operated at temperatures >650 °C. Due to economic reasons for components or parts of components which are subjected to temperatures <650 °C, 2% Cr or 9-12% Cr steels is used, depending on the required mechanical properties. This makes the dissimilar joining of Ni-base alloys an...

Weld pool surface can change dynamically during welding and is indicative of information critical to controlling the process. Research has picked up in the field of observing the weld pool surface to understand the dynamics of the welding process. This paper will help visualize and understand the physics involved in observing the weld pool surface. A study of laser properties, weld pool and cam...

Girth weld cracking is one of the main failure modes in oil and gas pipelines; girth weld cracking inspection has great economic and social significance for the intrinsic safety of pipelines. This paper introduces the typical girth weld defects of oil and gas pipelines and the common nondestructive testing methods, and systematically generalizes the progress in the studies on technical principl...

use of tailor-welded blanks (twbs) in production has significant advantages such as weight and cost reduction. however, their application requires processes that increase their poor formability in comparison to base materials. one of these procedures is the use of fluid pressure in sheet metal forming. in this paper hydro-mechanical deep drawing process of tailor-welded low carbon steel (st12) ...

line is the breakage of whatever weld carried out between steel coils, that are used to produce the continuous strip to be processed. A weld breakage results in a several hours stop of the manufacturing line. In this process the damages caused by the breakage must be repaired. After the reparation and in order to go on with the production it will be necessary a restarting process of the line. F...