hemicellulose of southern yellow pine wood spices was extracted by pressurized hot water at three different temperatures: 140°c, 155°c and 170°c. compounding with pp (polypropylene) was performed by extrusion after preparing wood flour and sieving to determine its mesh size. the ratio of wood to polymer was 50:50 based on oven-dry weight of wood flour. all extraction treatments and control samp...

In this work, the potential for usage recycled polystyrene and wood flour wastes as materials for development wood plastic composites was evaluated. The effects of wood flour loading and coupling agent addition on the mechanical, dynamic mechanical and morphological properties of polystyrene wood flour composites were examined. The results showed that the mechanical properties decreased with th...

High-melting-temperature poly(ethylene terephthalate) (PET) was successfully introduced into wood plastic composites through a two-step reactive extrusion technology. Wood flour was added into pre-prepared PET/high density polyethylene (HDPE) microfibrillar blends (MFBs) in the second extrusion at the temperature for processing HDPE. Addition of 25% in situ formed PET microfibers obviously incr...

Lignocellulose nanofibers were prepared by the wet disk milling of wood flour. First, an ethylene-butene copolymer was pre-compounded with wood flour or lignocellulose nanofibers to prepare master batches. This process involved evaporating the water of the lignocellulose nanofiber suspension during compounding with ethylene-butene copolymer by heating at 105 °C. These master batches were compou...

this study was conducted to investigate the effects of applying methods andamount of ammonium polyphosphate (0, 2 and 4 wt%) on fire retardancy andmechanical properties of wood flour/polypropylene composites. the resultsshowed that addition of fire retardant improved the mechanical properties such astensile and flexural strengths and fire retardancy of composites. but by increasingof fire retar...

This study investigated weathering performance of an HDPE wood plastic composite reinforced with extracted or delignified wood flour (WF). The wood flour was pre-extracted with three different solvents, toluene/ethanol (TE), acetone/water (AW), and hot water (HW), or sodium chlorite/acetic acid. The spectral properties of the composites before and after artificial weathering under accelerated c...

D. J. Gardner Department of Forest Management and Advanced Engineered Wood Composites Center, University of Maine, Orono, ME 04469, USA Abstract The combination of synthetic thermoplastic polymers and wood is normally problematic because wood surfaces are hydrophilic while typical thermoplastic polymers are hydrophobic. A possible solution is to use block copolymer coupling agents. In this work...

Potassium methyl siliconate (PMS) was investigated as a new nano modifier of wood fiber and wood flour to improve the compatibility between the fiber/flour and the plastic matrix in fiber reinforced plastic composites. Before injection molding, bleached and brown pulp fibers and mixed species wood flour were pretreated in PMS solutions. The morphology of the treated and untreated fiber and flou...

The objective of this study is to investigate an appropriate process to fabricate the wood-polyurethane hybrid composites [wood-polyurethane foam (PUF)]. Rigid PUFs that contain up to 20% wood flours were successfully fabricated from polymeric 4,4-diphenylmethane diisocyanate, polyols, silicone surfactant, dibutin dilaurate/ dimethylethanolamine catalysts, and distilled water (chemical blowing ...

the effect of impact modifier on creep behavior of wood flour- recycled polypropylene composites has been evaluated in this work. for this purpose, impact modifier (ethylene vinyl acetate) and recycled polypropylene were mixed with wood flour (50/50% w/w) as well as the impact modifier (0, 3%, 6% and 9%) by a counter-rotating twin-screw extruder to manufacture the wood flour- recycled polypropy...