the study of nucleation mechanism of new grains during severe plastic deformation of magnesium alloys is of great importance to control the characteristics of final microstructures.  to investigate the role of discontinuous recrystallization, a wrought az31 magnesium alloy was deformed by accumulative back extrusion process at 330 °c.  the obtained microstructures were studied using optical and...

A new class of magnesium alloys has been developed by dissolving large amounts of oxygen atoms into a magnesium lattice (Mg-O alloys). The oxygen atoms are supplied by decomposing titanium dioxide nanoparticles in a magnesium melt at 720 °C; the titanium is then completely separated out from the magnesium melt after solidification. The dissolved oxygen atoms are located at the octahedral sites ...

The paper presents an investigation on the effect of process variables and material condition on forgeability of magnesium wrought alloys of Mg-Al-Zn group, AZ31, AZ61 and AZ91. The experimental work includes studies of forging capabilities of the alloys in closed-die forging at hot and warm-working temperatures. Forging tests are performed for material both in as-cast and asworked condition, f...

The precipitation and evolution of microstructure in a spray-cast Al-7034 alloy and a commercial wrought Al-2024 alloy were studied after equal-channel angular pressing (ECAP) using transmission electron microscopy and differential scanning calorimetry (DSC). Microstructural examination showed the grain sizes of both alloys were reduced to the range of ~0.3–0.5 μm through ECAP. The DSC analysis...

Precipitation behaviour of wrought Al-6Mg alloys with ternary scandium and quaternary zirconium and titanium has been studied. Hardness measurements and resistivity studies are employed to assess the precipitation behaviour of scandium doped Al-6Mg alloy without or with quaternary additions of zirconium and titanium. Further, the kinetics of precipitations are studied by differential scanning c...