In the analysis and design of municipal solid waste (MSW) landfills, there are many uncertainties associated with the properties of MSW during and after MSW placement. Several studies are performed involving different laboratory and field tests to understand the complex behavior and properties of MSW, and based on these studies, different models are proposed for the analysis of time dependent s...

Carbon dioxide, methane and nitrous oxide are the major Greenhouse Gases (GHG’s), which emit from landfill areas and contribute significantly to global warming. Moreover, that the global warming potential of methane is 21 times higher than that of carbon dioxide and it has highest generation (60%) than other gases. Therefore, there is immense concern for its abatement or utilization from landfi...

In bioreactor landfill, the leachate flow and moisture distribution depend upon saturated and unsaturated hydraulic properties of municipal solid waste (MSW). The effects of unsaturated parameters have not been studied because of scarcity of the data and variation in unsaturated parameters due to MSW heterogeneity, degree of decomposition, and pore structure. In this study, a numerical two-phas...

Landfill leachate from municipal solid waste (MSW) landfills is a long-term emission problem, which may last for several hundreds of years. The waste management resulting in this type of problem cannot be considered sustainable. This doctoral thesis focuses on the possibilities for changing leachate management strategies in order to enable a greater degree of sustainability. The first part of t...

There is considerable interest today in the so-called “biocell” approach toward municipal solid waste (MSW) landfilling in which leachate is introduced back into the landfill. This approach reduces the cost of leachate management and is said to reduce/eliminate the potential for long term landfill gas production and groundwater pollution. However, a critical review of the typical approach being...

Site selection of new landfills for municipal solid waste (MSW) disposal is a great concern of urban governments around the world as old landfill sites are being filled-up and demand for new sites is increasing. Finding a suitable MSW disposal site of adequate size meeting all the regulations is a costly endeavor. With the advent of geographic information systems (GIS) and its decision support ...

Aluminum enters municipal solid waste MSW landfills from untreated raw curbside trash MSW , industrial waste, and aluminum production wastes variously called dross, baghouse fines, salt cake, and other designations. Aluminum related reactions can arise and become problematic for landfill operations by generating undesirable heat, liquid leachate, and gases, such as hydrogen, hydrogen sulfide, c...

A fine fraction (FF) was mined from two Finnish municipal solid waste (MSW) landfills in Kuopio (1- to 10-year-old, referred as new landfill) and Lohja (24- to 40-year-old, referred as old landfill) in order to characterize FF. In Kuopio the FF (<20mm) was on average 45±7% of the content of landfill and in Lohja 58±11%. Sieving showed that 86.5±5.7% of the FF was smaller than 11.2mm and the fra...

Municipal solid waste incinerator (MSWI) bottom ash is often used as the protection layer for the geomembrane and intermediate layer in the landfill. In this study, three sets of simulated landfills with different mass proportion of MSWI bottom ash layer to municipal solid waste (MSW) layer were operated. Cu and Zn concentrations in the leachates and MSW were monitored to investigate the effect...

Despite recent increases in recycling, composting, and incineration, the sanitary landfill remains the predominant and most economical municipal solid waste (MSW) management alternative. Modern MSW landfills strive to optimize the design, construction, and operation processes in order to mitigate many of the potentially negative impacts, and improve the profitability. The bioreactor landfill (B...