In this paper, based on the switching cell approach, a unified steady state analysis for families of soft-switching dc–dc converters with complete unified design equations will be presented. The concept of the unified approach and step by step procedure for a generalized process are discussed and applied to selected soft-switching families such as zero-voltage-switching (ZVS) and zero-current-s...

This paper presents a family of soft-switching DC–DC converters with a simple auxiliary circuit consisting of a coupled winding and a pair of auxiliary switch and diode. The auxiliary circuit is activated in a short interval and thus the circulating conduction losses are small. With the auxiliary circuit, zero-voltage-switching (ZVS) and zero-current-switching are achieved for the main and auxi...

This paper presents the design of integrated Dead-Time-Locked Loops (DTLL) for a fixed-frequency Zero-Voltage-Switching QuasiSquare-Wave (ZVS-QSW) buck converter. This is developed to address the challenges of DC/DC conversion for next-generation high-performance microprocessors. The DTLLs provide real-time accurate dead-time control with fast error rejection to realize ZVS, which minimizes swi...

This paper illustrates the study of three isolated zero voltage switched (ZVS) PWM full bridge (FB) converters to charge the high voltage battery in the charger of electric vehicle (EV). EV battery chargers have several challenges such as high efficiency, high reliability, low cost, isolation, and high power density. The cost of magnetic and filter components in the battery charger is reduced w...

This paper presents the Zero-Voltage Switching (ZVS) performance of Dual Active Bridge (DAB) DC-DC converter for high power density aerospace applications. Switching transitions of the transistor occurring in favorable conditions such as device zero-voltage or zero-current is called as soft-switching. The benefits of soft-switching are reduced switching losses, switch stress, low electromagneti...

A major problem in an isolated DC/DC converters operating at high switching frequencies is the attendant switching losses in the semiconductor devices. This can be reduced by introducing either zero-voltage switching (ZVS) or zero-current switching (ZCS) of the semiconductor switches. This paper deals with the simulation, design, fabrication and experimental evaluation of a novel soft-switching...

Abstract– In this paper, a detailed analysis of the zerovoltage and zero-current-switching (ZVZCS) full-bridge PWM converters is performed. The differences of the zero-voltage-switching (ZVS) operation between the conventional ZVS full-bridge PWM converters and the ZVZCS full-bridge PWM converters are analyzed in depth. Circuit parameters that affect the soft-switching conditions are examined a...

The phase shift full bridge (PSFB) converter allows high efficiency power conversion at high frequencies through zero voltage switching (ZVS); the parasitic drain-to-source capacitance of the MOSFET is discharged by a resonant inductance before the switch is gated resulting in near zero turn-on switching losses. Typically, an extra inductance is added to the leakage inductance of a transformer ...

A soft switching three-transistor push-pull(TTPP)converter is proposed in this paper. The 3rd transistor is inserted in the primary side of a traditional push-pull converter. Two primitive transistors can achieve zero-voltage-switching (ZVS) easily under a wide load range, the 3rd transistor can also realize zero-voltage-switching assisted by leakage inductance. The rated voltage of the 3rd tra...