In this work, the performance of electrocoagulation with aluminum electrodes for simultaneous removal of nickel, copper, zinc and chromium from synthetic aqueous aliquot solutions and actual electroplating wastewater was studied. Parameters affecting the electrocoagulation process, such as initial pH, current density, initial metal ion concentration, COD and contact time were investigated. Best...

Zinc was electrodeposited from an acidic sulphate solution on commercial steel sheet substrates galvanostatically at 10, 20, and 100 mA/cm2. The steel substrates had an average roughness number of 1.34 microns and a high percentage of its grains had their (111) planes parallel to the plate surface. During electrodeposition at 10 mA/cm2, on some specimens, there was an intense potential fluctuat...

Zinc was electrodeposited from an acidic sulphate solution on commercial steel sheet substrates galvanostatically at 10, 20, and 100 mA/cm2. The steel substrates had an average roughness number of 1.34 microns and a high percentage of its grains had their (111) planes parallel to the plate surface. During electrodeposition at 10 mA/cm2, on some specimens, there was an intense potential fluctuat...

Zinc electroplating was used to enhance corrosion resistance of porous metal injection molded 440C stainless steel. Controlled porosity achieved by the powder space holder technique and using sodium chloride as a material. The internal pore structure deposited zinc with three different electrolytes acetate, sulfate, chloride. Our results show that all depositions on samples significantly improv...

in this work, we developed a method which combined the processes of acid-leaching, ammonium jarosite precipitating and electro-depositing to recover copper and nickel from electroplating sludge. residual sludge from an electroplating plant located in qingdao was used for acid-leaching, and more than 95% of copper, nickel, zinc, chromium and iron were extracted from the sludge. after acid-leachi...

Slow strain rate tests were performed on quenched and tempered AISI 4340 steel to measure the extent of hydrogen embrittlement caused by electroplating with zinc-cobalt alloys. The effects of bath composition and pH were studied and compared with results for electrodeposited cadmium and zinc-10%nickel. It was found that Zinc-1%cobalt alloy coatings caused serious hydrogen embrittlement (EI 0.63...

A ZnO compact layer formed by electrodeposition and ZnO nanorods grown by chemical bath deposition (CBD) allow the processing of low-temperature, solution based and flexible solid state perovskite CH3NH3PbI3 solar cells. Conversion efficiencies of 8.90% were achieved on rigid substrates while the flexible ones yielded 2.62%.