Synthesis of ZnO nanostructures films by a co-precipitation followed by the deposition processed onto a glass substrate by spin-coating technique was carried out. The effect of annealing temperatures (from 250 to 325 °C for 30 min) on the structural and optical properties of the ZnO films have been investigated. The structural studies reveal that ZnO films are polycrystalline with hexagonal wur...

A stepwise surface functionalization methodology was applied to nanostructured ZnO films grown by metal organic chemical vapor deposition (MOCVD) having three different surface morphologies (i.e., nanorod layers (ZnO films-N), rough surface films (ZnO films-R), and planar surface films (ZnO films-P). The films were grown on glass substrates and on the sensing area of a quartz crystal microbalan...

ZnO thin films with significantly reduced band gaps were synthesized by doping N and codoping Al and N at 100 C. All the films were synthesized by radiofrequency magnetron sputtering on F-doped tin-oxide-coated glass. We found that codoped ZnO: (Al,N) thin films exhibited significantly enhanced crystallinity compared with ZnO doped solely with N, ZnO:N, at the same growth conditions. Furthermor...

By varying the ratio of the constituents, compound films can exhibit a widely tunable range of physical properties. Atomic layer deposition ~ALD! techniques are based on sequential, self-limiting surface reactions and can grow compound films. In this study, ZnO/Al2O3 alloy films were prepared using ALD techniques. By adjusting the ALD pulse sequence, the ZnO/Al2O3 alloy film composition was var...

N-doped ZnO thin films were deposited on n-type Si(100) and homo-buffer layer, and undoped ZnO thin film was also deposited on homo-buffer layer by RF magnetron sputtering method. After deposition, all films were in-situ annealed at 800 C for 5 minutes in ambient of O2 with pressure of 10 Torr. X-ray diffraction shows that the homobuffer layer is beneficial to the crystalline of N-doped ZnO thi...

Antibacterial properties of TiO2, ZnO as well as mixed TiO2-ZnO nanoparticles coated low density polyethylene films on Staphylococcus aureus PTCC1112 were investigated. Bactericidal efficiency of 0.5, 1 and 2 Wt% for TiO2 and ZnO nanoparticles and also 1 Wt% mixed TiO2-ZnO nanoparticles with TiO2:ZnO ratios of 25:75, 50:50 and 75:25 were tested under UV and fluorescent lights exposure at two di...

This study reports the surface roughness and nanomechanical characteristics of ZnO thin films deposited on the various substrates, obtained by means of atomic force microscopy (AFM), nanoindentation and nanoscratch techniques. ZnO thin films are deposited on (aand c-axis) sapphires and (0001) 6H-SiC substrates by using the pulsed-laser depositions (PLD) system. Continuous stiffness measurements...

in this paper, zno thin film is deposited on slide glass substrate using the sol-gel process. presenting well-defined orientation of zno thin films nanostructure were obtained by dip coating of zinc acetate dihydrate, monoethanolamine (mea), de-ionized water and isopropanol alcohol. the annealed zno thin films were transparent ca 85-90% in visible range with an absorption edges at about 375 nm....

ZnOfilmswith thickness of 80 nmwere grownbypulsed laser deposition (PLD) onMgO (100) single crystal and amorphous fused silica (FS) substrates. Structural studies of ZnO films and a high quality reference ZnOsingle crystalwereperformedby slowpositron implantation spectroscopy (SPIS). Itwas found that ZnO films exhibit significantly higher density of defects than the reference ZnO crystal. Moreo...

The sol-gel route has been applied to obtain ZnO-TiO2 thin films. For comparison, pure TiO2 and ZnO films are also prepared from the corresponding solutions. The films are deposited by a spin-coated method on silicon and glass substrates. Their structural and vibrational properties have been studied as a function of the annealing temperatures (400-750 °C). Pure ZnO films crystallize in a wurtzi...