BACKGROUND Friction between archwires and brackets is assuming greater importance for finishing with increased use of sliding mechanics in orthodontics as friction impedes the desired tooth movement. The following study is conducted to compare and evaluate the effect of ligation on friction in sliding mechanics using 0.022" slot bracket in dry condition. MATERIALS & METHODS In the study 48 co...

The surface topography of 100 clinically used archwires of stainless steel, beta-, or nickel-titanium were investigated that had contacted either ceramic or stainless steel brackets. One group consisted of two sets: 60 wires with no treatment records accessed to bias analyses, and 40 wires for which extensive clinical records were available, half of which were used with ceramic or stainless ste...

Metal-based scaffolds such as stents are the most preferred treatment methods for coronary artery disease. However, impaired endothelialization on the luminal surface of the stents is a major limitation occasionally leading to catastrophic consequences in the long term. Coating the stent surface with relevant bioactive molecules is considered to aid in recovery of endothelium around the wound s...

Frictional resistance is an important counterforce to orthodontic tooth movement during sliding mechanics. This study was carried out to evaluate the effect of ceramic bracket and ceramic bracket with metal slot -archwire‐ ligation combinations on “resistance to sliding” during simulated canine retraction on typodont model. The frictional resistance was tested between Ceramic brackets (3MUNITEK...

The corrosion resistance of type 304L and 316 austenitic stainless steels in 2M H2SO4 at 0-1.5%NaCl concentrations was studied through potentiodynamic polarization technique and optical microscopy analysis. The corrosion rate, pitting potential, passivation potential and surface morphology of both steel where significantly altered by the Clion concentration, alloy composition and metallurgical ...

In an inductively-coupled H2-Ar plasma at a total pressure of 1.5 Pa the influence of the electrode cover material on selected line intensities of H, H2, and Ar are determined by optical emission spectroscopy and actinometry for the electrode cover materials stainless steel, copper, tungsten, Macorr, and aluminum. Hydrogen dissociation degrees for the considered conditions are determined experi...

Fracture fixation of the medial malleolus in rotationally unstable ankle fractures typically results in healing with current fixation methods. However, when failure occurs, pullout of the screws from tension, compression, and rotational forces is predictable. We sought to biomechanically test a relatively new technique of bicortical screw fixation for medial malleoli fractures. Also, the AO gro...

To measure the cleanability of stainless steel surfaces under standardized conditions, a test stand was set up. Three stainless steel plates (size 200 x 100 mm) can be fixed to the test stand and sprayed with a water jet from a low-pressure nozzle for a period of several minutes. The plates were previously soiled with a starch or protein film with a pre-defined layer thickness and dried for sev...

Objectives The purpose of this study was to investigate the effect of different types of toothpaste on the frictional resistance between stainless steel brackets and archwires. Materials and Methods Ninety stainless steel orthodontic brackets with stainless steel wires were bonded to bovine teeth and were divided into 6 groups for application of the following toothpastes: Colgate® Total® Adva...

Poly (ethylene glycol) (PEG) molecules attached to surfaces have shown high potential as a protein repellent due to their flexibility and highly water solubility. A quartz crystal microbalance recording frequency and dissipation changes (QCM-D) has been used to study the adsorption from aqueous solutions, of lysozyme and α-lactalbumin proteins (the last with and without calcium) onto modified s...