Nowadays, Ni-free austenitic stainless steels are being developed rapidly and high price of nickel is one of the most important motivations for this development. At present research a new FeCrMn steel was designed and produced based on Fe-Cr-Mn-C system. Comparative studies on microstructure and high temperature mechanical properties of  new steel and AISI 316 steel were done. The results ...

A new method to generate large scale and highly dense nanoholes is presented in this paper. By the pulsed laser irradiation under water, the hydrogen etching is introduced to form high density nanoholes on the surfaces of AISI 4140 steel and Ti. In order to achieve higher nanohole density, laser shock peening (LSP) followed by recrystallization is used for grain refinement. It is found that the...

This paper presents investigations on hard turning with variable edge design PcBN inserts. Turning of hardened AISI 4340 steel with uniform and variable edge design PcBN inserts is conducted, forces and tool wear are measured. 3D finite element modelling is utilized to predict chip formation, forces, temperatures and tool wear on uniform and variable edge micro-geometry tools. Predicted forces ...

This paper presents the three dimensional (3D) finite element analysis to predict the workpiece displacement amplitude and tool wear in face turning of AISI 1040 steel under dry machining condition. 3D vibration induced turning models have been developed and validated by comparing with experimental results so as to identify the correlation. Extensive experimentation and investigators carried ou...

The in-process monitoring and real-time control of the penetration depth during laser welding is evaluated. An optical collimator collects the optical emission for measurement with a fast spectrometer. The sensor data are used to calculate the electron temperature and subsequently to determine the weld quality of overlap welds in AISI 304 stainless steel sheets performed both with CW Nd:YAG and...

Microscopic methods usable for sample surface imaging and subsequent qualitative and quantitative evaluation of platelet adhesion to the surface of the biomaterial studied were compared. It was shown, making use of the samples of medical steel (AISI 316L), that such tools as surface imaging with scanning electron microscopy (SEM), glutaraldehyde induced fluorescence technique (GIFT) and metallu...

Micro Electric Discharge Machining is a nontraditional machining process which can be used for drilling micro holes in high strength to weight ratio materials. This present research study deals with the single optimization of micro EDM process using Genetic Algorithm. Mathematical models using Response Surface Methodology (RSM) is used to correlate the response and the parameters. The desired r...

An investigation into influence of the austenitising temperature and the austenite deformation temperature on Nb precipitation and recrystallisation kinetics was carried out for a steel containing 0.081C-0.021Ti-0.064Nb (wt. %). The austenite grain structure was correlated to the dispersive properties of Nb atom clustering and precipitation. Irrespective of the austenitising temperature, deform...