Numerical fracture toughness assessment of two types of steel, AISI 420 and AISI 431, has been conducted in this paper. The J-integral is chosen as a criterion for fracture behaviour comparison of compact type (CT) specimens made of investigated materials. The values of J-integral are determined through a newly developed algorithm using finite element (FE) stress analysis results of numerically...

In this study, some mechanical properties of borided and unborided four steels were investigated. Boronizing of steels was performed by powder pack method at 1210 K for 4 h. The hardness of borides, boride layer thickness and room temperature tensile properties were measured and it was observed that hardness and tensile properties strongly depend on chemical composition of steels. In addition, ...

Single droplet impingement onto inclined heated surface is studied experimentally. Droplet in the form of aquades dropped from a fixed height 70 mm to metal with 45º impact angle. This experiment uses 3 types metals; Stainless Steel AISI 304, Aluminum Alloy 2024, and Copper. All material surfaces are mirror polished assumed have same treatment condition. Surface temperatures 110 ºC, 150 ºC 210 ...

this experimental study investigated the effects of quenching and tempering heat treatment on fatiguebehavior and also tempering temperature and time holding of aisi 1060 steel. at first, the specimenswere austenitized at 800˚c for 1 hour, and then were quenched in the water bath of 25˚c temperature.after that, tempering process was done at the temperature of 250˚c, 450˚c and 650˚c for 1 and 2 ...

Powder-actuated (also referred to as low velocity or powder-driven) fasteners are commonly used to attach cold-formed steel framing members, usually a track, to a concrete or structural steel support. Although commonly used, their behavior is less well understood than other fasteners such as screws, bolts and welds. The AISI Cold-Formed Steel Design Manual does not explicitly address powder act...

Gas Metal Arc Welding (GMAW) process was analyzed by combining a finite element thermomechanical model for temperature and stress with solidification model. Model prediction was compared with experimental data in order to validate the model. The effects of welding process parameters on these welding fields were analyzed and reported. The effort to correlate the residual stress and solidificatio...

This paper presents the results of time and temperature resolved analysis of changes in phase composition and stresses/residual stresses during quenching and martensitic transformation of steel. Sample temperatures up to 900°C were reached with a specially-designed furnace, in which fast cooling of sample is executed by gas quenching. Stress development during quenching followed the expected tr...