The word, “Cryogenics” is taken from two Greek words – “kryos” which means cold or freezing, and “genes” meaning born or generated. Technologically, it means the study and use of materials (or other requirements) at very low temperatures. In general cryogenic treatment consists of slow cooling already heat treated part to approximately -196C, holding at low temperature up to prescribed period, ...

Butt joints of A5052 aluminum alloy and SS400 steel, with a new type of chamfered edge, are welded by means of metal inert gas welding and ER4043 Al-Si filler metal. The microhardness and microstructure of the joint are investigated. An intermetallic layer is found on the surface of the welding seam and SS400 steel sheet. The hardness of the intermetallic layer is examined using the Vickers har...

The influence of heat treatment time and temperature on the microstructure and corrosion resistance of cast stainless steel alloys CN3MN (UNS J94651) and CK3MCuN (UNS J93254) were investigated with a combination of microscopy techniques and immersion corrosion testing. The as-cast alloys exhibited significant residual microsegregation of Mo across the dendritic substructure and the presence of ...

WEDM is one of the important variants of electrical discharge machining (EDM) which uses the thermal energy generated between the electrodes for machining the electrically conducive materials. This method has been successfully implemented in common materials like aluminum, stainless steel etc., But its application in super alloys like Ti6Al4V is still under investigations. This paper reviews th...

NiTi alloy wires are widely used in many applications for examples, orthodontic arch wires, mini screw implant, sensors, etc. Usually, wire drawing process is chosen to produce arch wires because of its high productivity as well as superior surface quality of the drawn wire surface. In the case of NITI arch wire, the cold work occurred during wire drawing operation also plays important role to ...

Polyethylene wear increasingly has been blamed for osteolysis and granuloma formation after total joint arthroplasty. The authors evaluated the wear difference between bearing surfaces of stainless steel, cobalt chrome, and titanium alloy. They also compared cemented all-polyethylene molded cups with cemented metal-backed molded acetabular cups. These were compared with molded and machined poly...

The walking beam furnace is one of the most prominent process plants often met in an alloy steel production factory and characterised by high non-linearity, strong coupling, time delay, large time-constant and time variation in its parameter set and structure. From another viewpoint, the walking beam furnace is a distributed-parameter process in which the distribution of temperature is not unif...

A method for measuring the real-time corrosion rates for Alloy 718, stainless steels (SS) 304L and 316L nuclear grade (NG), aluminum alloys 5052 (Al5052) and 6061 (Al6061), copper (Cu), tantalum (Ta), and tungsten (W) in two separate water systems that were irradiated by 800 MeV protons is presented. The ®rst water system was fabricated entirely of 304 SS, thoroughly cleaned before operation, a...

The walking beam furnace (WBF) is one of the most prominent process plants often met in an alloy steel production factory and characterised by high non-linearity, strong coupling, time delay, large time-constant and time variation in its parameter set and structure. From another viewpoint, the WBF is a distributed-parameter process in which the distribution of temperature is not uniform. Hence,...

Several investigators have pointed out that electron and neutron contamination from high-energy photon beams are clinically important. The aim of this study is to assess electron and neutron contamination production by various prostheses in a high-energy photon beam of a medical linac. A 15 MV Siemens PRIMUS linac was simulated by MCNPX Monte Carlo (MC) code and the results of percentage depth ...