An ultra-fine-grained AISI 301LN austenitic stainless steel has been achieved by heavy cold rolling, to induce the formation of martensite, and subsequent annealing at 800 C, 900 C, and 1000 C, from 1 to 100 seconds. The microstructural evolution was analyzed using transmission electron microscopy and the yield strength determined by tension testing. Ultra-fine austenite grains, as small as ~0....

We show that in metamagnetic shape memory alloys exhibiting a magnetostructural first order phase transition the direct transition from ferromagnetic austenite to nonmagnetic martensite is isothermal. In contrast to the direct transformation, the reverse one nonmagnetic martensite–ferromagnetic austenite is athermal, just as are athermal both direct and reverse martensitic transformations in co...

The formation of stress-induced martensite in superelastic NiTi was studied by neutron diffraction during uniaxial compressive loading and unloading. The respective phase fractions were determined as a function of the applied stresses using a Rietveld refinement with a March–Dollase texture formulation. Before loading, the specimen was fully austenitic. At the highest applied stress of 2625 MPa...

In this paper we discuss the microstructure of lath martensitic steels and the mechanisms by which it controls cleavage fracture. The specific experimental example is a 9Ni (9 wt% Ni) steel annealed to have a large prior austenite grain size, then examined and tested in the as-quenched condition to produce a relatively coarse lath martensite. The microstructure is shown to approximate the recen...

R. Bakić, Tutin High School, Serbia, M. O. Abukresh, A. Sedmak. Faculty of Mechanical Engineering, University of Belgrade, Serbia, I. Samardžić, Faculty of Mechanical Engineering, Slavonski Brod, University of Osijek, Croatia, R. Jovičić, Innovation centre of the Faculty of Mechnical Engineering, Belgrade, Serbia Complex microstructure of austenite-ferrite welded joint has been investigated, fo...

The vast majority of steel weld deposits solidify under highly nonequilibrium cooling conditions. A consequence of this is the chemical segregation of substitutional alloying elements during solidification, a segregation that persists as the weld cools to ambient temperature. Solidification-induced segregation of interstitials is usually not a problem due to the ease with which they can diffuse...

The effect of stress and strain on the transformation kinetics of pearlite is investigated by phase-field simulation. Strain is considered in terms of expansion/contraction during transformation and due to concentration gradients in austenite. It is demonstrated that due to the concentration dependence of the eigenstrain, an inhomogeneous stress distribution ahead of the transformation front en...

Deformation mechanisms of as-deposited and post-annealed Ti50.2Ni49.6, Ti50.3Ni46.2Cu3.5 and Ti48.5Ni40.8Cu7.5 thin films were investigated using the in situ synchrotron X-ray diffraction technique. Results showed that initial crystalline phases determined the deformation mechanisms of all the films during tensile loading. For the films dominated by monoclinic martensites (B19'), tensile stress...

A directional solidification technique was developed and applied to the problem of fractional crystallization of an iron meteorite parent body. Samples of Fe-Ni alloys close to meteorite compositions and containing S, P, and C were made. The solidified structures contain secondary phases such as sulphides within the proeutectic single crystal austenite (taenite). As a result of these experiment...

The electronic structure and magnetism of the Heusler alloy Mn2NiAl have been studied by firstprinciples calculations. It is found that the phase transformation from the cubic to the tetragonal structure lowers the total energy, indicating that the martensitic phase is more stable and that a phase transition from austenite to martensite may happen at a lower temperature. Thus, ferromagnetic sha...