A floating microbial fuel cell (FMFC) has been designed and its performance has been evaluated for 153 days. The power output gradually increased to a maximum value of 390 mW/m(3) at 125 days. The polarization resistance of the anode (R(p)(a)) changed with operating time reaching a minimum value at 125 days, while the polarization resistance of the cathode (R(p)(c)) was relatively constant and ...

Nanorod-FeP@C composites are synthesized via a one-pot solution reaction of ferrocene (Fe(C5H5)2) with excess triphenylphosphine (PPh3) in sealed vacuum tubes at 390 °C, in which PPh3 is used as both the phosphorus source and solvent in the reaction. The structure and lithium storage performance of the as-prepared nanorod-FeP@C composites are intensively characterized, and it is interesting tha...

Si is a promising anode material for Li-ion batteries, since it absorbs large amounts of Li. However, insertion of Li leads to 334% of volumetric expansion, huge stresses, and fracture; it can be suppressed by utilizing nanoscale anode structures. Continuum approaches to stress relaxation in LixSi, based on plasticity theory, are unrealistic, because the yield strength of LixSi is much higher t...

In order to reduce the amount of inactive materials, such as binders and carbon additives in battery electrode, porous cobalt monoxide nanofibers were directly grown on conductive substrate as a binder/additive-free lithium-ion battery anode. This electrode exhibited very high specific discharging/charging capacities at various rates and good cycling stability. It was promising as high capacity...

Nitrogen-doped holey graphene (N-hG) as an anode material for lithium-ion batteries has delivered a maximum volumetric capacity of 384 mAh cm(-3) with an excellent long-term cycling life up to 6000 cycles, and as an electrochemical capacitor has delivered a maximum volumetric energy density of 171.2 Wh L(-1) and a volumetric capacitance of 201.6 F cm(-3) .

Microbial fuel cells (MFC) have recently received increasing attention due to their promising potential in sustainable wastewater treatment and contaminant removal. In general, contaminants can be removed either as an electron donor via microbial catalyzed oxidization at the anode or removed at the cathode as electron acceptors through reduction. Some contaminants can also function as electron ...

Solid oxide fuel cells (SOFCs) have the potential to revolutionise the present fuel economy due to their higher fuel conversion efficiency compared with standard heat engines and the possibility of utilizing the heat produced in a combined heat and power system. One of the reasons they have yet to fulfil this potential is that the conventional anode material of choice, a nickel/yttria-stabilise...

Graphene possesses many fascinating properties originating from the manifold potential for interactions at electronic, atomic, or molecular levels. Here we report measurement of electron transparency and hole charge induction response of a suspended graphene anode on top of a void channel formed in a SiO2/Si substrate. A two-dimensional (2D) electron gas induced at the oxide interface emits int...

An elementary kinetic model is established to represent the coupled behavior of (electro)-chemistry, transport and degradation processes in the porous Ni/YSZ anode of solid oxide fuel cells (SOFC). The model is applied to support the development and evaluation of solid carbon formation mechanisms at Ni/YSZ anodes. The simulations of cells operated on partially reformed hydrocarbons show that pe...

Water-activated microbatteries with long shelf life have been demonstrated based on a one-mask micromachining process for the first time. Magnesium is used as the anode and silver chloride or cuprous chloride is used as the cathode in the prototype demonstration. Adding water or aqueous solutions activate the electrochemical reactions between the anode and cathode to release electricity. Experi...