The growth mechanism of currentline-oriented pores in n-type InP has been studied by Fast-Fourier-Transform Impedance Spectroscopy (FFT IS) applied in situ during pore etching and by theoretical calculations. Several pore growth parameters could thus be extracted in situ that are otherwise not obtainable. These include the space-charge-region (SCR) width, the SCR potential, the capacitance at t...

Regarding absorption spectrum, high corresponds to low light transmittance and relatively loud noise, whereas information content, which interferes with the modeling of spectral analysis. Appropriate absorbance level is necessary improve content reduces noise level. In this study, based on selection upper lower bounds absorbance, value optimization partial least squares (AVO-PLS) method was pro...

A simple chemical bath deposition is used to coat a complex porous ceramic scaffold with a conformal Ni layer. The resulting composite is used as a solid oxide fuel cell electrode, and its electrochemical response is measured in humidified hydrogen. X-ray tomography is used to determine the microstructural characteristics of the uncoated and Ni-coated porous structure, which include the surface...

Oil and gas production from tight, fractured reservoirs (sandstone, carbonates and shale) has increased significantly over the last decade. These hard rock targets are often characterized by vertically aligned fractures (i.e. HTI) embedded in a layered sequence (i.e. VTI). In this geologic setting, seismic velocities and η can vary with azimuth and depth. This is orthorhombic anisotropy and can...

the silica aerogel was prepared by the acid–base sol–gel polymerization of tetraethylorthosilicate precursor followed by ambient pressure drying. the prepared silica aerogels were characterized by fourier transform infrared )ft-ir(, thermo-gravimetric and differential thermal analysis )tg/dta(, x-ray diffractometer )xrd(, energy dispersive x-ray microanalysis )edx(, brunauer–emmitt–teller (bet)...

The size and distribution of wood pores greatly influence its properties like density, thermal conductivity and permeability as well as acoustical property. Different techniques were developed to measure wood pore characteristic parameters. In this paper, mercury intrusion porosimetry (MIP) and X-ray Micro-computed tomography (μCT) were used to characterize pore characteristics of Populus L. wo...

Encapsulation of healing agents embedded in a material matrix has become one of the major approaches for achieving self-healing function in cementitious materials in recent years. A novel type of microcapsules based self-healing cementitious composite was developed in Guangdong Provincial Key Laboratory of Durability for Marine Civil Engineering, Shenzhen University. In this study, both macro p...

Weproposeanewdefinitionof excessadsorption foruse inmolecularmodels of adsorption. Thisdefinition implies the calibration of theoreticalmodels inamannermimicking the experimental calibrationprocedure. The method of theoretical calibration is developed on the example of helium calibration. The notions of the He calibrated pore volume and the He calibrated pore size are introduced, and the He cal...

Several AVO cross plot methods were compared using well data from 5 exploration drilled in deep water block in Krishna-Godavari basin. This study shows that AVO Impedance vs. Acoustic Impedance cross plot provides the best separation between gas bearing sands, water bearing sands and shale/clay. AVO Impedance (AVOI) attribute derived by normalizing the Acoustic Impedance (AI) and Elastic Impeda...