the influence of flour content and immersion time in water on the creep behavior of composites made from high density polyethylene (hdpe) waste and mdf (medium density fiberboard) flour was investigated. mixing was carried out by a twin screw extruder and the sample was manufactured by flat hot press. firstly, the modulus of elasticity and bending strength of various mdf flour-polyethylene comp...

background diesel oil hydrocarbons are the most common contaminants of our biological environment. considering the fact that iran is one of the major producers of diesel oil products, it greatly contributes to soil and water pollution. currently, soil and water pollutions caused by diesel oil products leakage, from distribution stations, is one of the major concerns in iran. based on the studie...

Methane was generated from cotton waste, while considering its pollution in textile industries. Cotton waste includes solid content and is rich in cellulose having a moisture content of 8.8%. It is difficult to form slurry as the waste float on water and hence an experimental set up has been made like a batch type digester and experiments were conducted with a different proposition of water wit...

The environmental performance of industrial anaerobic digestion (AD), pyrolysis, and integrated system (AD sequence with pyrolysis) on food waste treatment were evaluated using life cycle assessment. The integrated treatment system indicated similar environmental benefits to AD with the highest benefits in climate change and water depletion in addition to the increased energy generation potenti...

The effects of adding of a range of organic amendments (biosolids, spent mushroom compost, green waste compost and green waste-derived biochar), at two rates, on some key chemical, physical and microbial properties of bauxite processing sand were studied in a laboratory incubation study. Addition of all amendments tended to decrease bulk density and macroporosity but increase total porosity, av...

Textile industries have their own importance in Indian economy. It consumes large amount of water and as a result huge amount of waste water is generated. Textile effluent comprises of suspended solids, mineral oils, residual oils and is characterized by high BOD (from 700 to 2000 mg/l) and COD loads. It is necessary to treat the waste water so that it does not have any threat to the environmen...

Four crop plants Oryza sativa (rice), Solanum melongena (brinjal), Spinacea oleracea (spinach) and Raphanus sativus (radish) were grown to study the impact of secondary treated municipal waste water irrigation. These plants were grown in three plots each of 0.5 ha, and irrigated with secondary treated waste water from a sewage treatment plant. Sludge from the same sewage treatment plant was app...

The MODAR process uses supercritical water, heated above 374OC and pressurized above 220 atm, as a medium for the rapid and complete oxidation of organic compounds to carbon dioxide, water and inorganic salts. The destruction efficiencies achieved exceed 99.99% for a wide range of compounds including chlorinated solvents and PCB’s. The exothermic oxidation reaction produces sufficient energy to...

Huge amounts of fresh water are used in the concrete industry every day. The quantity and quality play important roles determining quality, strength, setting time, durability cement-based materials (CBMs), such as paste, mortar, concrete. Freshwater systems under pressure due to climate changes, industrialisation, population growth, urbanisation, lack proper resource management. potable has res...