ABSTRACT: This study provides an analysis of the influence of underground CO2 storage on the effective stress field in a representative geological formation. Large scale finite element models are used to describe the injection process. For high injection rates, different material degradation mechanisms may be activated depending on initial conditions. The case of rock fracturing due to tensile ...

Rock bolting has firmly used as the coal mine roof reinforcement in underground coal mine. The bolting effect of fully grouted rebar bolt is closely related to the bolt surface profile. This paper provides an experimental study to confirm that bolt rib internal length has great influence on bolting effect. Pull-out tests were conducted using rebar bolt with different rib spacings of 12, 24, 36 ...

We have considered the problem of using microseismic data to characterize the flow of injected fluid during hydraulic fracturing. We have developed a simple probabilistic physical model that directly ties the fluid pressure in the subsurface during the injection to observations of induced microseismicity. This tractable model includes key physical parameters that affect fluid pressure, rock fai...

The Los Alamos Hot Dry Rock Reservoir is an experimental geothermal project in north-central New Mexico. A fractured zone was created within otherwise impermeable igneous and metamorphic rock by injecting water into a borehole under high pressure, at about 3.5 km depth. During the injection process, the seismic waves created by the fracturing events were recorded by seismometers located in four...

China is the world’s largest coal-producing country and mining-related land subsidence happens almost in every coal mining area. In north-west China, land subsidence in coal mining areas is mainly caused by underground mining activities and uncontrolled burnings of subsurface coal seam. As Hoffmann (2004) reported, burning coal-seams can result in extensive subsidence of several meters and typi...

Rapid development of coal deep mining equipment and technology, that is connected with widespread introduction of high-performance longwall sets of equipment is accompanied with an increase of economic losses in case of its possible downtime. The analysis of dismantling experience in modern Russian mines has shown that in absolute majority of cases the actual duration of re-assembling with rega...

We developed a hydraulic fracturing simulator by coupling a flow simulator to a geomechanics code, namely T+M simulator. Modeling of the vertical fracture development involves continuous updating of the boundary conditions and of the data connectivity, based on the finite element method for geomechanics. The T+M simulator can model the initial fracture development during the hydraulic fracturin...

Outcrop studies have revealed the presence of abundant cemented fractures in many low permeable formations. Recovered cores have also revealed the opening of some of these smaller size fractures on the wall surface of main hydraulic fractures. Furthermore, earlyproduction well-testing analysis in some of these cases provide estimates for hydraulically induced fracture surface areas which are mu...

Analysis on the current research status, this article studies on the dynamic subsidence principles of overburden rock strata during coal mining based on similar material simulation test. Close ranged industrial photogram metric system was introduced to collect data. After coordinate transformation, matching and model amendment, dynamic subsidence curves which can be used to analyze the continui...