high performance fiber reinforced cementitious composite (hpfrcc) materials exhibit strain hardening behavior with multiple cracking under tensile loading. in this paper, experimental and parametric studies are performed to assess the influence of using hpfrcc material instead of normal concrete in reinforced concrete beams. after calibrating the experimental results, the analytical results inc...

The dislocation shielding field at a crack tip was experimentally proven at the atomic scale by measuring the local strain in front of the crack tip using high-resolution transmission electron microscopy (HRTEM) and geometric phase analysis (GPA). Single crystalline (110) silicon wafers were employed. Cracks were introduced using a Vickers indenter at room temperature. The crack tip region was ...

The impact of uniaxial and hydrostatic stress on the ballistic thermal conductance (jl) and the specific heat (Cv) of [100] and [110] Si nanowires are explored using a Modified Valence Force Field phonon model. An anisotropic behavior of jl and isotropic nature of Cv under strain are predicted for the two wire orientations. Compressive (tensile) strain decreases (increases) Cv. The Cv trend wit...

A plasticity-fracture constitutive model is presented for prediction of the behavior of confined plain concrete. A three-parameter yield surface is used to define the elastic limit. Volumetric plastic strain is defined as hardening parameter, which together with a nonlinear plastic potential forms a non-associated flow rule. The use of non-associated flow rule improves the prediction of the dil...

Local strain measurements opposite gravel contacts and around a single isolated perforation are reported for a high-density-polyethylene pipe (320 mm outside diameter, 32 mm thick) typical of that commonly used as part of the leachate collection system in municipal solid waste landfills. Emphasis is given to examining the localized effect of coarse gravel contacts on pipe strain and the strain ...

PURPOSE The design of the attachment must provide an optimum stress distribution around the implant. In this study, for implant overdentures with a bar/clip attachment or a locator attachment, the stress transmitted to the implant in accordance with the change in the denture base length and the vertical pressure was measured and analyzed. MATERIALS AND METHODS Test model was created with epox...

This study presents a method to evaluate three-dimensional strain in meniscal tissue using medical imaging. Strain is calculated by tracking small teflon markers implanted within the meniscal tissue using computed tomography imaging. The results are presented for strains in the middle and posterior third of the medial menisci of 10 human cadaveric knees, under simulated physiologically relevant...

We demonstrate the selective area growth of GaN-(Al,Ga)N core-shell nanowire heterostructures directly on Si(111). Photoluminescence spectroscopy on as-grown nanowires reveals a strong blueshift of the GaN band gap from 3.40 to 3.64 eV at room temperature. Raman measurements relate this shift to compressive strain within the GaN core. On the nanoscale, cathodoluminescence spectroscopy and scann...

This study examined the stress-strain behavior of 10 calcium hydroxide (Ca(OH)2)-activated Hwangtoh concrete mixes. The volumetric ratio of the coarse aggregate (V agg) and the water-to-binder (W/B) ratio were selected as the main test variables. Two W/B ratios (25% and 40%) were used and the value of V agg varied between 0% and 40.0%, and 0% and 46.5% for W/B ratios of 25% and 40%, respectivel...

The in vivo mouse tibial loading model has been increasingly used to understand the mechanisms governing the mechanobiological responses of cancellous and cortical bone tissues to physical stimuli. Accurate characterization of the strain environment throughout the tibia is fundamental in relating localized mechanobiological processes to specific strain stimuli in the skeleton. MicroCT-based fin...