Improvements in strength and setting time of Portland cements (PC) are needed to enhance their performance as endodontic and load bearing materials. This study sought to enhance the compressive strength and setting time of a PC by adding one of the following additives: 20% and 30% poly-methylmethacrylate (PMMA), 20% and 30% irregular and spherical amalgam alloys, and 10% CaCl(2). The control co...

AIM The aim of this in vitro study was to compare the flexural strength, the flexural modulus and compressive strength of the acrylic polymer reinforced with glass, carbon, polyethylene and Kevlar fibres with that of plain unfilled resin. MATERIALS AND METHODS A total of 50 specimens were prepared and divided into 10 specimens each under 5 groups namely group 1- control group without any fibr...

Modulus of elasticity of concrete is frequently expressed in terms of compressive strength. While many empirical equations for predicting modulus of elasticity have been proposed by many investigators, few equations are considered to cover the entire data. The reason is considered to be that the mechanical properties of concrete are highly dependent on the properties and proportions of binders ...

OBJECTIVE The purpose of this study was to investigate the effects of two curing light intensities on the mechanical properties (Vickers microhardness, compressive strength, and diametral tensile strength) of bulk-fill resin-based composites (RBCs). MATERIALS AND METHODS Four commercially available bulk-fill RBCs (Tetric® N-Ceram, SonicFill™, Smart Dentin Replacement (SDR™) Posterior Flowable...

Novel syntactic foams made of starch and ceramic hollow micro-spheres were developed. Foams of four different micro-sphere size groups were manufactured with either preor post-mould gelatinisation process. Compressive failure behaviour and mechanical properties were evaluated. Not much difference in failure behaviour or in mechanical properties between the two processes (preand post-mould gel) ...

To improve the performance of concrete, polymers are mixed with concrete. It has been observed that polymer-modified concrete (PMC) is more durable than conventional concrete due to superior strength and high durability. In this research, effect of Styrene-Butadiene Rubber (SBR) latex on compressive strength and flexural strength of concrete has been studied and also the optimum polymer (SBR-La...

The purpose of this research was to experimentally characterize the flexural and tensile characteristics of fiber-reinforced Very High-Strength Concrete (VHSC) panels. The panels were made with a unique mix of cementitous materials achieving compressive strength of 26,000 psi (180 MPa) or greater. VHSC panels were reinforced with polypropylene fibers of 1 inch (25.4 mm) in length and Polyvinyl ...

Experimental evidence for a correlation between paperboard edgewise compressive strength and the product of the in-plane normal stiffness and out-of-plane shear stiffness is presented. A mathematical theory, which describes compressive failure as interlaminae shear failure due to prebuckling bending of an initially curved "critical" lamina, is developed. The theory is in accord with failure ana...

There is little question that the strength of the interfacial transition zone (ITZ) between cement paste and aggregate affects the compressive strength of concrete. The key question, rather, is to what degree? It is difficult to directly measure the response of the overall composite to changes in interfacial properties, since it is difficult to isolate interfacial strength as the only variable....

Aerated lightweight concrete have many advantages when compared with conventional concrete such as advanced strength to weight ratio, lower coefficient of thermal expansion, and good sound insulation as a result of air voids within aerated concrete. This paper is attention to classified of aerated lightweight concrete into foamed concrete and autoclaved concrete. Also, it is exhibits the raw ma...