The paper deals with the application of combined nondestructive method for assessment of compressive strength of calcium silicate bricks. In this case, it is a combination of the rebound hammer method and ultrasonic pulse method. Calibration relationships for determining compressive strength of calcium silicate bricks obtained from nondestructive parameter testing for the combined method as wel...

Tensegrity is a light weight deployable structure that is composed of compressive and tensile members. However, the compressive members, which are made of common metallic structural materials, are not mass-efficient. In this paper, we replace the compressive member with “self-similar” tensegrity structure that has same strength but less mass. We start with a non-tensegrity structure called C4T ...

OBJECTIVES Recently, it was shown that NanoMTA improved the setting time and promoted a better hydration process which prevents washout and the dislodgment of this novel biomaterial in comparison with WTMA. This study analyzed the compressive strength of ProRoot WMTA (Dentsply), a NanoWMTA (Kamal Asgar Research Center), and Bioaggregate (Innovative Bioceramix) after its exposure to a range of e...

In this research the effects of adding silica and alumina nanoparticles on flow ability and compressive strength of cementitious composites based on Portland cement were investigated. In the first stage, the rheological behavior of different samples containing nanosilica, nanoalumina and polypropylene, polyvinyl alcohol and polyethylene fibers were evaluated. With increasing of nanoparticles in...

The main idea of the presented work is to examine the effect of adding industrial waste in the form of Gray Cast iron (GCI) and Ductile Cast Iron (DCI) from the casting industry in the concrete mix. GCI and DCI turnings were used as a partial replacement material for the usual fine aggregates to study the effect on compressive strength and flexural strength of the mix. Partial replacement of fi...

The purpose of this study is to compare the differences in flexural strength and compressive strength between four resin-modified luting glass ionomer cements that are commonly used in clinics. Furthermore, this study investigates the influence of curing mode on the flexural strength and compressive strength of dual-cured resin-modified glass ionomer cements. Initially, flexural strength and co...

This data article provides a comparison data for nano-cement based concrete (NCC) and ordinary Portland cement based concrete (OPCC). Concrete samples (OPCC) were fabricated using ten different mix design and their characterization data is provided here. Optimization of curing time using the Weibull distribution model was done by analyzing the rate of change of compressive strength of the OPCC....

Concrete with gangue which made with ordinary Portland cement at different water binder ratio (0.35, 0.40 and 0.45) or ordinary Portland cement at water binder ratio of 0.35 incorporating 10% fly ash or 20% fly ash; 20% fly ash and 1% early strength agent, slag with the replacement of 15% or 30%, or 15% fly ash and 15% slag were made and exposed to a wetting–drying sulfate environment. The comp...

The aim of this paper is to carried out statistical analysis for optimization of various concrete mix proportions by using full factorial experimental technique. The variables such as 28 days cube compressive strength, water to cement ratio (w/c), coarse aggregate to total aggregate ratio (CA/TA) and total aggregate to cement ratio (TA/C) were the parameters to be used for optimization. Four w/...