a constant problem in the production, maintenance, and use of agricultural pesticides, is their physical-chemical corrosive properties in contact with machines and equipment. the present study attempted to increase the corrosion resistance of steel parts to agricultural pesticide with the application of appropriate thin tio2 nanoparticle coatings. this coating was applied on mild steel coupons ...

Pitting is a form of localized corrosion. One way to increase pitting resistance is, therefore, cover surfaces with inhibitor molecules. Many plant extracts have been reported be able adsorb onto metal surfaces. According uniform corrosion, the corrosion rate decreased due adsorption. Terminalia bellirica fruit contains organic chemicals which can The extract was used in this work as for 304 st...

Semi-solid metal processing results in liquid segregation at the surface of the components. The pitting behavior of this surface layer of semi-solid metal processed alloy F357 was compared with the centre (or bulk) of cast plates in 3.5% NaCl aqueous solution. It is shown that pitting attack occurs preferentially in the eutectic regions at the interface between silicon particles and the alpha p...

In this study, polypyrrole was deposited on the aluminium in different anions (C N Cr DBS–). The contribution of anions to formation of polypyrrole film was investigated by using cyclic voltammetry (CV) technique. The effect of polypyrrole film on the corrosion of aluminium was searched in 0.1 M HCI solution by using potentiostatic method. For this purpose, polarization curves were obtained, co...

The effect of Ta addition on the pitting corrosion resistance duplex stainless steels was investigated in both cases without and with deoxidization/desulfurization by Al Ca. improved two proposed mechanisms. For Ca, MnS inclusions which act as initiation sites are modified to electrochemically-stable (Ta,Mn) oxysulfides. (CaS (Al,Ca)oxides) coated stable Ta-containing nitrides resulting suppres...

A discotic liquid crystal (DLC), HBC-C12, coating was successfully applied to improve the corrosion resistance of an iron surface. The iron surface with the DLC-coating exhibited improved corrosion resistance in various environments, including exposure to air and solutions with different pH values. To the best of our knowledge, studies regarding corrosion protection using DLCs have never been r...

Corrosion behavior of Ni20Cr coatings deposited by HVOF (high velocity oxygen-fuel) process was evaluated in ZnCl2-KCl (1 : 1 mole ratio) molten salts. Electrochemical techniques employed were potentiodynamic polarization curves, open circuit potential, and linear polarization resistance (LPR) measurements. Experimental conditions included static air and temperatures of 350, 400, and 450°C. 304...

Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process or serv...

Prediction of service life of ductile iron pipe is carried out using the information on pipe condition, backfill/soil properties, and corrosion rates, as well as historical failure records. Among the factors that affect pipe condition, external pitting corrosion is a prominent variable contributing to the disintegrity of the pipe. A pipe scanner equipped with a laser displacement sensor was use...