in this study, the feasibility of using magnetic technology to reduce the dispersion of soil has been investigated. the reference treatment was potable water and 3 magnetic water devices (with different magnetic intensities) were used for magnetizing the potable water. the results showed that the magnetic field has a significant effect in order of 5 percent on increasing of magnesium concentrat...

An x-ray multilayer mirror, specially designed to produce resonant absorption at a definite angle of incidence, may be used as an angular dispersive element for refractive x-ray radiography. In this method the signal-to-noise ratio can be significantly enhanced due to suppression of the shot noise produced by the direct beam. Refraction contrast of a copper wire 75 μm in diameter and a human ha...

Polyvinylpyrrolidone  /  Nickel  oxide  (PVP/NiO)  dielectrics  were fabricated  with  sol-gel  method  using  0.2  g  of  PVP  at  different working  temperatures  of  80,  150  and  200  ºC.  Structural  properties and surface morphology of the hybrid films were investigated by X- Ray  diffraction  (XRD)  and  Scanning  Electron Microscope  (SEM) respectively. Energy dispersive X-ray spec...

In the present work, we report a suitable approach for the preparation of BaTiO3 nanostructures via the hydrothermal condition using Dolapix ET85 as surfactant. The powders were investigated by X-ray diffraction (XRD), scanning election microscopy (SEM), energy-dispersive X-ray spectroscopy (EDAX), field emission transmission electron microscopy (FETEM), selected area electron diffra...

Nowadays various methods are presented for synthesis of barium strontium titanate (BST) nanopowders with different morphology and properties. Each of these (BST)s has got individual characterization that makes it suitable for a special application. Every method has a special quality, causes it to have preference over the other methods. Low processing temperature is a desired point which most of...

Nowadays various methods are presented for synthesis of barium strontium titanate (BST) nanopowders with different morphology and properties. Each of these (BST)s has got individual characterization that makes it suitable for a special application. Every method has a special quality, causes it to have preference over the other methods. Low processing temperature is a desired point which most of...

A simple and green synthetic strategy to prepare BaO/TiO2-ZrO2 as a solid base catalyst was reported. These materials with various amounts of BaO were prepared by the adsorption method. The physical and chemical properties of BaO/TiO2-ZrO2 were investigated by X-ray diffraction, X-ray fluorescence, specific surface area and BJH pore size distribution, FT-IR spectroscopy, scanning electron micro...

  In this work,copper/palladium (Cu/Pd) multilayer nanowires were successfully prepared by electrodeposition method using polycarbonate template. The fabrication of Pd/Cu multilayer nanowires was controlled by analyzing the current–time transient during electrodeposition using potentiostat. The morphological properties of the nanowires were studied by scanning electron microscopy (SEM) and resu...

< p>Mg-Fe bi-metal oxide was prepared and utilized as a magnetized renewable solid base catalyst for formation of 2-aminothiophenes by means of Gewald’s reaction. The prepared heterogeneous basic solid catalyst can be separated by a magnet and reused without considerable wastage in this activity. The structure of the aforementioned magnetized basic nano-catalyst was studied by XRD (X-ray diffra...