Continuous tuning over a 1.6 THz region in the near-infrared (842.5-848.6 nm) has been achieved with a hybrid ring/external cavity laser having a single, optically-driven grating reflector and gain provided by an injection-seeded semiconductor amplifier. Driven at 532 nm and incorporating a photonic crystal with an azobenzene overlayer, the reflector has a peak reflectivity of ~80% and tunes at...

An ultra-wideband (UWB) antenna with a novel multilayer frequency selective surface (FSS) reflector is presented. A significant enhancement in the gain has been achieved in a low profile design while maintaining the excellent impedance bandwidth of the UWB antenna. The average peak gain of the antenna has been increased from 4 dBi to 9.3 dBi as a consequence of the use of the FSS reflector. Mor...

In this paper comparison of Reflector Antenna analyzing techniques based on wave and ray nature of optics is presented for an offset reflector antenna using GRASP (General Reflector antenna Analysis Software Package) software. The results obtained using PO (Physical Optics), PTD (Physical theory of Diffraction), and GTD (Geometrical Theory of Diffraction) are compared. The validity of PO and GT...

Unlike metal as conventional Perfect Electric Conductor (PEC) for unidirectional beam reflector, the periodic structures are now attracting more attention form academia and industrial as High Impedance Surface (HIS) or Artificial Magnetic Conductor (AMC) reflector. Because quarter wavelength (λ/4) separation between antenna and PEC reflector is needed for unidirectional beam applications, it in...

A design of a Bragg reflector for a Raman FEL is described It is shown that mode conversion occurs whenever the axial wavenumbers of the two modes fulfil the Bragg condition. With a constant ripple of the corrugation it is shown that the reflected radiation also contains higher order modes, assuming that the incident radiation consists only of a TE mode . The mode purity can be increased by inc...

As discovered by the Gestaltists, in particular by Duncker, we often perceive motion to be within a non-retinotopic reference frame. For example, the motion of a reflector on a bicycle appears to be circular, whereas, it traces out a cycloidal path with respect to external world coordinates. The reflector motion appears to be circular because the human brain subtracts the horizontal motion of t...

This paper presents the design of a tri-mode matched feed horn to remove the beam squinting effects in a circularly polarized offset parabolic reflector antenna. In a conical horn, three modes i.e., TE11, TM11 and TE21 are combined in proper amplitude and phase proportion to obtain a tri-mode matched feed configuration. The proposed tri-mode horn is then used as a primary feed device to illumin...

We have recently proposed a new concept for deployable reflectors consisting of a thin parabolic carbon-fibre-reinforced-plastic (CFRP) shell stiffened along the edge by an elastically collapsible stiffener. Here we show that a stiffener accounting for less than 10% of the total mass of the reflector increases the stiffness of the softest deformation mode of the deployed reflector by 48 times, ...

This paper reports on the design and implementation of high efficiency, nonmetallic reflectors integrated on the sidewalls of micromachined cavities. Due to shadowing from deposition within a cavity, significant variation in the thicknesses of the dielectric thin films composing the reflectors are encountered when the layers are deposited by Plasma Enhanced Chemical Vapor Deposition (PECVD). Th...

Unlike other restriction enzymes, BfiI functions without metal ions. It recognizes an asymmetric DNA sequence, 5'-ACTGGG-3', and cuts top and bottom strands at fixed positions downstream of this sequence. Many restriction enzymes are dimers of identical subunits, with one active site for each DNA strand. Others, like FokI, dimerize transiently during catalysis. BfiI is also a dimer but it has o...