Gas tungsten arc welding is the primary process for precision joining. To develop a control system for this process, a novel sensor is proposed to measure the depth of the weld pool surface using a non-transferred arc. A flat surface is periodically established to provide a real-time reference. The main-arc-on period is selected as the system’s input. Because of possible large variations/ranges...

A main problem raised by arc welding manufacturing is the determination of the optimal process parameters to ensure weld quality as well as resource efficient and sustainable production. To address this problem a better process understanding is required. In this study thermal magneto hydrodynamic modeling of a welding arc is used to reach a deeper insight into the influence of the composition o...

Most of the inspection methods used for detection and localization of welding disturbances are based on the evaluation of some direct measurements of welding parameters. This direct measurement requires an insertion of sensors during the welding process which could somehow alter the behavior of the metallic transference. An inspection method that evaluates the GMA welding process evolution usin...

Welding is a very important part of the development and growth industry because it has role in engineering, reparation, construction. Shielded Metal Arc (SMAW) or conventional arc welding process particularly dominant structural joints, pressure vessels maintenance repair work. In welding, different metals are joined economically at much faster rate as compared with other fabrication processes ...

Solid free-form fabrication (SFF) based on gas–tungsten arc welding (GTAW) is one of the few rapid prototyping techniques that has the capability to build three-dimensional metallic parts. For this application, a mild steel (AISI 1018) was used. The most important problem in this process was to find the optimal process parameters. The goal is to build complex three-dimensional parts by depositi...

Power input to the arc in gas metal arc welding controls both the metal transfer process and the base-plate heating process. It would be advantageous to decouple these processes. Methods to achieve this decoupling are discussed. Pulsed-power welding is widely used, but only decoupling can be achieved. More complete decoupling may be obtained by using independent power inputs to the system. Seve...

Repair welding is not used enough in the industry 1 . One of the reasons for this lies in the insufficient and unrealiable knowledge in many segments of this area. A very important part is having appropriate knowledge of metallurgical processes in heating of the base material 2-4 . Unsuitable heating deteriorates the microstructure as it reduces toughness and fracture behaviour of the weld 5 . ...

The purpose of this study is to evaluate the nonionizing radiation (NIR) exposure, especially optical radiation levels, and potential health hazard from aluminum arc welding processes based on the American Conference of Governmental Industrial Hygienists (ACGIH) method. The irradiance from the optical radiation emissions can be calculated with various biological effective parameters i.e., S( ),...

Associated to the weld quality, the weld bead geometry is one of the most important parameters in welding processes. It is a significant requirement in a welding project, especially in automatic welding systems where a specific width, height, or penetration of weld bead is needed. This paper presents a novel technique for real-time measuring of the width and height of weld beads in gas metal ar...