Recent developments in phosphorus (P) removal have focused on P reactive materials to use within constructed wetlands (CW), as a sustainable alternative to chemical dosing. In this study, different fractions of Basic Oxygen Furnace (BOF) steel slag and apatite media have been tested in full-scale CWs, being the first trial of its kind in the United Kingdom evaluating the P removal capacity of b...

Alkali Activated Slag Concrete (AASC) mixes are manufactured by activating ground granulated blast furnace slag (GGBFS) using sodium hydroxide and sodium silicate solutions. The aim of the present experimental research was to investigate the effect of increasing the dosages of sodium oxide (Na2O, in the range of 4 to 8%) and the activator modulus (Ms) (i.e. the SiO2/Na2O ratio, in the range of ...

Current blast furnace technology is a two-stage ironmaking process that requires that iron ore concentrate first be formed into pellets, fired at 1260°C, cooled, transported to the blast furnace, and then re-heated to approximately 1500°C to produce pig iron. This heating, cooling, and then reheating wastes a great deal of energy, which would be saved if the ironmaking process had only a single...

Tensile creep of concrete at early ages is one of the important factors that affect the stress of restrained and partly restrained concrete. But only few data are available on tensile creep of concrete. The effect of ground slag on tensile creep was studied using lever-type tensile creep tester. Early age tensile basic creep of concrete loaded at the age of 3 days was researched. Results show t...

In this study, ground granulated blast-furnace slag (GGBFS) samples from Singapore, Korea, and the United Arab Emirates were hydrated with purified water to estimate the cementing capabilities without activators. Raw GGBFS samples and hardened pastes were characterized to provide rational explanations for the strengths and hydration products. The slag characteristics that influenced the best st...

The recent increase in number and capacity of special melting techniques and refi ning processes is related to the continuing growth of high-temperature alloy usage in wrought and cast form and to the fact that the metallurgical and technological potential of conventional melting and casting processes have been largely exhausted. The evol ution of the major melting processes for high-performanc...

OBJECTIVES Increased concentrations of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzo-furans (PCDFs) in pooled blood samples from workers at municipal waste incinerators have been reported. This study was undertaken to confirm these results in individual blood samples from potentially exposed and unexposed workers at municipal waste incinerators compared with matched unex...

Phosphorus (P) adsorption capacities of materials derived from batch experiments can vary by several orders of magnitude depending on the method used, leading to potential misinterpretation of the P retention capacity on a long-term basis and unrealistic estimations of constructed wetland systems (CWS) longevity. The objective of this study was to determine if the P saturation of the material i...

Concurrently to research conducted on ordinary Portland cement (PC), new types of binders were developed during the last decades. These are formed by alkali-activation of metakaolin or ground-granulated blast furnace slag (GGBFS) and are named, respectively, geopolymers (GP) or alkali-activated slag (AAS). Four different cementitious materials were synthesised: PC, AAS, GP, and a mix GP-AAS and...

An important problem in metallurgy of iron and steel is management of hydrated, fine-grained, iron-bearing waste which can be formed as a result of gas scrubbing. The article presents a model of application of converter slurry in a closed-circuit flow system. The correct preparation of slag, namely briquetting with defined additives, allows for application of such slag in the steel-making proce...