A. Śliwa, M. Bonek, Silesian University of Technology, Institute of Engineering Materials and Biomaterials, Gliwice, Poland Investigations include FEM simulation model of alloying the PMHSS6-5-3 steel surface layer with the carbides and ceramic powders, especially WC, VC, TiC, SiC, Si3N4 and Al2O3 particles using the high power diode laser (HPDL). The FEM computations were performed using ANSYS...

This paper reports the results of a study into the effectiveness of the SPARK toolset for showing the absence of run-time errors in safety-critical Ada software. In particular, the toolset is examined to determine how effective it is in finding run-time errors in a SPARK program, and how much of the process of proving freedom from run-time errors can be performed automatically. The study identi...

In recent year’s aluminum and aluminum alloys are widely used in automotive industries. These are light weight (density of about 2.7g/cc),having good malleability and formability, high corrosion resistance and high electrical and thermal conductivity. High machinability and workability of aluminum alloys are prone to porosity due to gases dissolved during melting processes. However, in the engi...

In this study, a very thin Ni/Au bilayer metal film was prepared by electron beam evaporation and thermal alloying to form ohmic contact on p-type GaN film. After thermal alloying, the current– voltage (I – V) characteristic of Ni/Au contact on p-type GaN film exhibited ohmic behavior. The Ni/Au contacts showed a specific contact resistance of 1.7310 V cm at an alloying temperature of 450 °C. I...

Gradient nanostructures (GNSs) have been optimized in recent years for desired performance. The diffusion behavior in GNS metals is crucial for understanding the diffusion mechanism and relative characteristics of different interfaces that provide fundamental understanding for advancing the traditional surface alloying processes. In this paper, atomic diffusion, reactive diffusion, and surface ...

A series of palladium-based catalysts of metal alloying (Sn, Pb) and/or (N-doped) graphene support with regular enhanced electrocatalytic activity were investigated. The peak current density (118.05 mA cm(-2)) of PdSn/NG is higher than the sum current density (45.63 + 47.59 mA cm(-2)) of Pd/NG and PdSn/G. It reveals a synergistic electrocatalytic oxidation effect in PdSn/N-doped graphene Nanoco...

Incorporation of liquid crystalline polymers (LCPs) into commodity polymers remains a challenge in the design of high-performance, low-cost polymeric blends. Blends of a thermoplastic polymer and a nematic LCP are produced here by mechanical alloying. Functionality sensitive X-ray microscopy reveals LCP dispersions as small as 100 nm in diameter. Intimate mixing remains upon subsequent melt pro...

Severe plastic deformation has the fascinating power of alloying equilibrium-immiscible elements, overriding the thermodynamic driving force (positive heat of mixing) that would dictate phase separation in equilibrium. This article briefly reviews the current understanding of this subject, in terms of experimental evidence for atomic-level alloying and phase selection, and in particular the mod...

Abstract Densely consolidated WC-based hard materials with 5 – 20 vol% ZrSiO 4 was fabricated by spark plasma sintering at 1400 ℃ a constant heating rate of 70 ℃/min −1 . To achieve mechanical alloying WC-ZrSiO , planetary ball milling carried out for 12 h, during which the brittle-brittle components (WC-ZrSiO ) became fragmented and their particles refined. It observed that certain, specific, ...