The high quality LCLS electron beam generated in the photoinjector is subject to many instabilities in the downstream acceleration and compression. The instability can be initiated by any density modulation of the electron beam generated at the photocathode. In this paper, we prescribe the tolerance on the initial electron beam density modulation possibly introduced by the ultraviolet (uv) lase...

A very simple pinhole camera set-up has been built to diagnose the electron beam emittance of the ESRF. The pinhole is placed in the air next to an Al window. An image is obtained with a CCD camera imaging a fluorescent screen. The emittance is deduced from the size of the image. The relationship between the measured beam size and the electron beam emittance depends upon the lattice functions a...

In transmission electron microscopy (TEM) the interaction of an electron beam with polymers such as P3HT:PCBM photovoltaic nanocomposites results in electron beam damage, which is the most important factor limiting acquisition of structural or chemical data at high spatial resolution. Beam effects can vary depending on parameters such as electron dose rate, temperature during imaging, and the p...

OBJECTIVE Development of a technique for treating whole-body skin using linear accelerator with electron beam energy of 6-MeV at a short treatment distance. MATERIAL AND METHODS The 6 MeV high dose rate total skin electron irradiation mode on a linear accelerator was used. Beam profiles and percentage depth doses in the patient plane were measured for different beam angulations. RESULTS At ...

The ionizing radiation of livestock wastewater for the removal of nitrogen and phosphorus was studied in the presence of a natural zeolite. The feasibility of a combined process of zeolite ion exchange and electron beam irradiation of livestock wastewater was also investigated. The removal efficiencies of NH4-N, T-N and T-P were significantly enhanced by electron beam irradiation after zeolite ...

2014 The design and performance of a versatile closed, light (0,9 kg), high temperature furnace adapted to the needs of a neutron four-circle diffractometer is reported. It operates between 330 and 1 200 K with a long term stability of better than 0.05 K. There are few restrictions on the movement of the circles; only the 03A6-range is limited to 200°. The furnace operates under high vacuum (ty...

We demonstrated that EDS measurement can be significantly improved by precessing the electron beam, thereby reducing electron channeling effects. For a SrTiO3 specimen orientated along the [001] zone axis, the measured strontium to titanium atomic ratio was 0.74-0.80 using conventional EDS methods, and the ratio was improved to ~0.99 by precessing the electron beam for angles greater than 22.54...

Here we present time-resolved in situ transmission electron microscopy (TEM) observations and real-time manipulation of nematic ordered cellulose and ultradrawn polyethylene films. Drawn films of these two polymers exhibited a unique response to the low-dose electron beam. Electron beam damage was minimal based on retention of an organized electron diffraction pattern. Increased electron dosage...

Experiments were conducted in a previously described crossed electron/molecular beam instrument1. In brief, an electron beam (~110 meV resolution) is generated with a trochoidal electron monochromator and crossed with an effusive beam of HFeCo3(CO)12 supplied through a capillary tube by sublimation at 348-353 K. The electron energy is scanned by ramping the acceleration voltage of the monochrom...

An important limit for energy gain in laser-plasma wakefield accelerators is the dephasing length, after which the electron beam reaches the decelerating region of the wakefield and starts to decelerate. Here, we propose to manipulate the phase of the electron beam in the wakefield, in order to bring the beam back into the accelerating region, hence increasing the final beam energy. This rephas...