This study presents the results from centrifuge modeling experiments performed to understand effects of temperature changes on vertical pullout capacity scale-model torpedo piles embedded in soft clay layers. The model pile is a pointed stainless-steel cylinder with fins at top, installed by self-weight base layer using stepper motor. An internal electrical resistance heater was used control te...

Hydraulic fracturing is a phenomenon in which cracks propagate through the porous medium due to high pore fluid pressure. Hydraulic fracturing appears in different engineering disciplines either as a destructive phenomenon or as a useful technique. Modeling of this phenomenon in isothermal condition requires analysis of soil deformation, crack and pore fluid pressure interactions. In this paper...

Stone column replacement of soft soil foundation construction method is more and used in water conservancy projects. On the one hand, stone has high permeability, which enhances dissipation capacity excess pore pressure; on other it a stiffness, reduces additional stress soil, therefore pressure. These two mechanisms work together to improve bearing soil. In previous plane strain transformation...

in this work a glass micromodel which its grains and pores are non-uniform in size, shape and distribution is considered as porous medium. a two-dimensional random network model of micromodel with non-uniform pores has been constructed. the non-uniformity of porous model is achieved by assigning parametric distribution functions to pores throat and pores length, which was measured using image a...

hydraulic fracturing in the fractured reservoirs plays a significant impact on the production rate. in this study, the hydrostatic condition is taken into account, the hydraulic fracturing operation was applied in every direction usinga written distinct element code. in each direction the hydraulic fracture is applied with different lengths and in each level the amount of production is predicte...

Filtration media are required to have suitable pore size, pore size distribution, pore volume, pore surface area and permeability for performing satisfactorily in applications. It is difficult to encounter all the desired properties in a filtration medium. In this investigation, we have characterized filtration media by flow porometry, used these pre-characterized filtration media to design com...

Seismic velocities in rocks at ultrasonic frequencies depend not only on the degree of saturation but also on the distribution of the fluid phase at various scales within the pore space. Two scales of saturation heterogeneity are important: (1) saturation differences between thin compliant pores and larger stiffer pores, and (2) differences between saturated patches and undersaturated patches a...

In geotechnical engineering, the mechanical behavior of rocks under various In-situ conditions (stress state including axial stress, confining pressure, pore water pressure) have always been an important topic. Therefore, pressure effect on permeability and different size sandstone samples a certain condition was studied. The sizes shows roughly same exponential de-creasing law with increase pr...

Damage to underground structures caused by liquefaction is one of the important types hazards in field geotechnical engineering. Utility tunnels are lifeline projects cities. To ensure sustainable and safe operation utility over a design life 100 years, this paper investigates seismic response pattern liquefied site. In paper, shaking table tests were carried out on tunnel layered liquefiable B...