There is considerable interest in developing fuel-flexible, low emissions turbines for power generation. One approach is based on burning a variety of lean premixed fuels with relatively low flame temperatures. Such flames can be stabilized in a low swirl burner configuration, for example, using a variety of fuels such as pure hydrogen and hydrogen-seeded hydrocarbon mixtures. However, many hyd...

Vertically well-aligned multi-walled carbon nanotubes (MWNTs) with uniform diameters ( 15 nm) were grown on catalytic probes at high yield rates in an inverse diffusion flame (IDF) of a co-flow jet configuration using methane as fuel. Varied parameters investigated included: alloy composition (e.g. Fe, Ni/Cu, Ni/Cr/Fe), sampling positions within the flame structure, and voltage bias applied to ...

A sustainable, heat-resistant and flame-retardant cellulose-based composite nonwoven has been successfully fabricated and explored its potential application for promising separator of high-performance lithium ion battery. It was demonstrated that this flame-retardant cellulose-based composite separator possessed good flame retardancy, superior heat tolerance and proper mechanical strength. As c...

In this work, copper pyrovanadate (Cu3V2O7(OH)2(H2O)2) nanoparticles have been synthesized by a simple and rapid chemical precipitation method. Different copper-organic complexes were used to control the size and morphology of products. The morphology and structure of the as-synthesized products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission elec...

A numerical shooting method for performing linear stability analyses of travelling waves is described and applied to the problem of freely propagating planar premixed flames. Previous linear stability analyses of premixed flames either employ high activation temperature asymptotics or have been performed numerically with finite activation temperature, but either for unit Lewis numbers (which ig...

A portable spectrometer system that simultaneously measures the temperature, emissivity, and radiation intensity of an alkali metal was used in a 1000 MW coal-fired power plant boiler furnace. A calibrated fiber-optic spectrometer system was applied to obtain the radiation intensity of the flame. A simple method based on polynomial fitting was used to separate the continuous baseline from the m...

The fundamental differences between the leading-order jump conditions, often assumed at a flame sheet in combustion theory, and the actual effect of a chemical reaction that satisfies Arrhenius kinetics with a finite activation temperature, need to be understood. These differences are “higher order” in terms of a large activation temperature analysis. However, they do provide a quantitative est...

The Lagrangian Flamelet Model is formulated as a combustion model for large-eddy simulations of turbulent jet diffusion flames. The model is applied in a large-eddy simulation of a piloted partially premixed methane/air diffusion flame ~Sandia flame D!. The results of the simulation are compared to experimental data of the mean and RMS of the axial velocity and the mixture fraction and the unco...

Carbon fibre reinforced flame-retarded bioepoxy composites were prepared from commercially available sorbitol polyglycidyl ether (SPE) cured with cycloaliphatic amine hardener. Samples containing 1, 2, and 3% phosphorus (P) were prepared using additive type flame retardants (FRs) resorcinol bis(diphenyl phosphate) (RDP), ammonium polyphosphate (APP), and their combinations. The fire performance...

Methanol and ethanol have been investigated as very high octane fuels for knock control/avoidance in spark ignition engines. Direct injection of the alcohol results in substantial cooling of the cylinder charge, decreasing the chemical kinetic rates that result in autoignition. However, decreasing the temperature of the cylinder charge also affects the initial flame propagation. The purpose of ...