ginger waste material (gwm) has been utilized as adsorbent for removal of hazardouspatent blue vf (pbvf) dye from aqueous solution. batch adsorption experiments wereperformed as a function of ph, contact time, dye concentration, adsorbent dose and temperature.the optimum ph required for the maximum adsorption was found to be 2. the experimentalequilibrium adsorption data were tested using langm...

BACKGROUND In this work, the magnetite (Fe3O4) nanoparticles (MNPs) and silica-coated magnetite nanoparticles (SMNPs) were synthesized as adsorbents for removing humic acid (HA) from water resources. METHODS The adsorption processes were performed in batch experiments with which the influence of pH, reaction time, adsorbent dosage, initial concentrations of HA and temperature were investigate...

The aim of this research was to investigate the potential of raw and iron oxide impregnated carbon nanotubes (CNTs) as adsorbents for the removal of selenium (Se) ions from wastewater. The original and modified CNTs with different loadings of Fe2O3 nanoparticles were characterized using high resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), X-ray diffracto...

The ability of cynodon dactylon based thermally activated carbon to remove fluoride from aqueous solution has been investigated. The batch adsorption studies were carried out at neutral pH as the functions of contact time, adsorbent dose, adsorbate concentration, temperature and effect of co-anions, which are commonly present in water. The rate of adsorption was rapid during initial 105 minutes...

It is the purpose of this paper to investigate data fitting attributes exponential integral isotherm, which was first derived by Ruthven in 2004 describe adsorption at gas–solid interfaces. The a variant virial incorporates two parameters Langmuir isotherm and has an expandable mathematical structure. lain dormant for nearly 20 years. This fact may seem surprising considering versatility as wil...

The crosslinked chitosans synthesized by the homogeneous reaction of chitosan in aqueous acetic acid solution with epichlorohydrin were used to investigate the adsorptions of three metals of Cu(II), Zn(II), and Pb(II) ions in an aqueous solution. The crosslinked chitosan characterized by 13CNMR, SEM, and elemental analysis, and the effects of pH and anion on the adsorption capacity were carried...

introduction: arsenic is known as a carcinogenic compound in drinking water . it can cause acute and chronic effects on human health. in this study, the effect of polyamidoamine dendrimer generation 3(pamam g3) as adsorbents for removal of arsenic (v) from aqueous solutions was evaluated.     methods: adsorption experiment was studied in batch system and the effect of different variables like p...

This study examines the suitability of natural silica sand as a low-cost adsorbent for the removal of ammoniacal nitrogen and heavy metals, particularly iron and zinc, from semi-aerobic stabilized landfill leachate. Leachate samples were collected from the Pulau Burung landfill site (PBLS) in Penang, Malaysia. The above-mentioned contaminants are highlighted in this study because of their unsaf...

in this study, the removal of as (v) from water resources by using aluminum-coated pumice as a new adsorbent was assessed. the features of the adsorbent coating layer were observed by x-ray diffraction (xrd) and scanning electron microscopy (sem).the effects of various parameters such as adsorbent doses, ph, contact time, arsenate initial concentration and interfering ions in arsenic adsorpt...

in this study, the removal of as (v) from water resources by using aluminum-coated pumice as a new adsorbent was assessed. the features of the adsorbent coating layer were observed by x-ray diffraction (xrd) and scanning electron microscopy (sem).the effects of various parameters such as adsorbent doses, ph, contact time, arsenate initial concentration and interfering ions in arsenic adsorption...