The plant powder of Jaswand (Hibiscus rosa-Sinensis) were activated with sulphuric acid and used as low cost easily available and renewable biological adsorbent for the removal of acid dyes (acid blue, acid red and malachite green) from aqueous solution. Batch experiments were carried out for adsorption kinetics and isotherms. Operating variable studied were pH, temperature, adsorbent dose, ini...

In the present study, jatropha oil cake (JOC), a waste produced from processing jatropha seeds for biodiesel production, has been investigated for the removal of nickel (II) from aqueous solutions. Jatropha oil cake contains different functional groups that can participate in the metal ion complexation. Jatropha oil cake is used in its natural form (JOCN) as well as in its immobilized form (JOC...

This work examined the removal of Pb(II) using a chitosan derivative (SB, synthesized from benzaldehyde) assisted by a magnetic field. The adsorption capacity for Pb(II) was investigated. It was found that 1) the pH and concentration of the ion solution, as well as exposure time and strength of magnetic field, affected the degree of adsorption; and 2) studies of the adsorption isotherms and kin...

This investigation reveals the capability of Agave lechuguilla for trivalent and hexavalent chromium removal from aqueous solutions. Experimentation included pH profile, time dependence, adsorption capacity (K(F) and Q(L)), adsorption intensity (n and R(L)) and saturation capacity (q(s)) studies. Batch experiments were conducted at 22( composite function)C to characterize and model the adsorpti...

Syringopicroside is the major constituent in Folium syringae leaves with known pharmacological activities. In this study, a simple method for preparative separation of syringopicroside from F. syringae leaves with macroporous resins was developed. Adsorption characteristics of syringopicroside on six types of macroporous resins, including ADS-8, ADS-17, D141, NKA-9, HPD450, and HPD600, have bee...

Adsorption behavior of chromium, Cr(VI) from wastewater has been investigated using clarified sludge (a steel plant waste material), rice husk ash and sawdust as non-conventional adsorbents. The studies were carried out at room temperature (30C) following batch adsorption technique in a reciprocating shaker. Factors affecting the adsorption characteristics such as agitation time, initial metal ...

Biosorption has attracted attention as a cost-effective means for the treatment of metal-bearing wastewater. While using novel biosorbents, optimization of operating conditions becomes more important for the efficiency of the process. In this study, a novel biosorbent i.e banana peel were used for biosorption of Sn2+ from aqueous media. The effect of various parameters, such as, contacts time o...

The present study presents the effective use of nanocrystalline akaganeite for the adsorption of an anionic (SDS), a cationic (CTAB), and a nonionic (tween80) surfactant from wastewater. Equilibrium experiments, as well as thermodynamic analysis, were performed. The maximum SDS adsorption occurs at the lowest pH value (5), the opposite is observed for CTAB (pH = 11), while for tween80, the chan...

Sorption of 75 active pharmaceutical ingredients (APIs) to three different types of sludge (primary sludge, secondary sludge with short and long sludge age respectively) were investigated. To obtain the sorption isotherms batch studies with the APIs mixture were performed in four nominal concentrations to water containing 1 g of sludge. The range of APIs concentrations was between ng L(-1) to μ...

Equilibrium models used for predicting phosphorus (P) loss from a site often use the Langmuir strength of P bonding, KL and the P sorption maximum, Smax, or the Freundlich adsorption coefficient, KF, obtained from traditional isotherms, as model input parameters. The overall objective of the study was to develop a protocol to allow estimation of isotherm parameters for soils using simple extrac...