نتایج جستجو برای: freundlich isotherm
تعداد نتایج: 6811 فیلتر نتایج به سال:
The sorption behavior of loofa-immobilized Phanerochaete chrysosporium mycelia in two forms, Live (L) and Heat-Inactivated (HIA), was studied for the removal of Hg2+ ions from aqueous solution. Using the Langmuir isotherm, the two key parameters for the sorption performance, qm and the coefficient b, were obtained; the qm ...
An agricultural waste and eco-friendly biosorbent i.e. rice husk has been used as a cheap adsorbentfor the removal of methylene blue dye from aqueous solutions. The physical properties of the developedadsorbent were characterized using FTIR. The study was realized using batch experiments. The effectsof contact time, pH, initial dye concentration, biosorbent dose and temperature were investigate...
In this study, the oxidation of dye from colored wastewater by H2O2/ MWCNT’s multi walls carbon nano tubes solution assisted with UV radiation was investigated. Disperse Blue 56 DB 56 was used as a model dye. Adsorption behavior of DB56 from aqueous solution onto MWCNT’s was investigated under various conditions such as initial pH value, dye concentration, H2O2 and MWCNT’s dosage. Maximum adsor...
In this study adsorption of 1-chloro-4-nitrobenzene on single walled carbon nanotubes has been investigated. The effect of contact time, pH, initial concentration of 1-chloro-4-nitrobenzene, adsorbent dosage and temperature on its adsorption has been carried out in order to find optimum adsorption conditions. Adsorption isotherms and related constants were also determined. Results showed that ...
The effects of the functional groups and structures of two different resins, weak base/macroporous and strong base/gel type, Purolite A170 and Dowex 21K on the adsorption properties of Re(VII) ions were investigated experimentally and described by the isotherm, kinetic, and thermodynamic modeling. In this regard, four widely used adsorption isotherm models including Langmuir, Freundlich, Temkin...
Abstract This Study aims to determine the adsorption process of Cu (II) metal by cassava peel waste ( Manihot esculenta crantz ) meeting Langmuir equation and Freundlich. Research method made into activated carbon, then mass, pH optimum contact time. Then determination maximum capacity was carried out testing with isotherm Freundlich equations. The results showed that best conditions (optimal c...
abstractin this work, the micro powder was the product of cedar leaf (mpcl) is used as a low-cost adsorbent for the removal of pb2+ ions from aqueous solutions. bath experiments were used to determine the best adsorption conditions the adsorption percentage of pb2+ ions mpcl samples at different initial ph, contact time (tc), adsorbent dosage and temperature (t) were investigated. effective rem...
present study deals with the adsorption of glycolic acid (ga) from aqueous solutions by using bagasse fly ash (bfa). bfa is a solid waste generated from bagasse fired boilers and can be used as an adsorbent. batch adsorption studies were carried out to evaluate the effect of various parameters like adsorbent dose, contact time, initial concentration and temperature on the removal of ga from aq...
conclusions the study results showed that by increasing the initial dye concentration and contact time, the adsorption capacity increased, as well. moreover, the thermodynamic parameters (δh °, δg °, and δs °) revealed the endothermic sorption of rr-198 onto mwcnts. results the rr-198 absorption rates were 33.26 and 222.88 mg/g, respectively for 20, and 200 mg/l dye concentration, at ph of 3, 6...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید