This paper presents a parametric cable model for an Austrian 0.4 mm cable.

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it defines a set of managed objects for Simple Network Management Protocol (SNMP) based management of the Baseline Privacy Plus features of DOCSIS 1.1 and DOCSIS 2.0 (Data-over-Cable Service Interface Specification) compliant Cable Modems and C...

Previous theoretical investigations of translating cables have been focused on the sagged cable equilibrium referred to here as the minimum cutenary. The minimum catenary is stable for finite translation speeds [ 1,2] and asymptotically approaches a buckling instability as the translation speed tends to infinity [2]. Experimental evidence presented in this paper validates this conclusion and th...

Abstract—Worldwide, most PILC MV underground cables in use are approaching the end of their design life; hence, failures are likely to increase. This paper studies the electric field and potential distributions within the PILC insulted cable containing common void-defect. The finite element model of the performance of the belted PILC MV underground cable is presented. The variation of the elect...

it. In fact, video tape is recorded by the video camera which is settled on the AUV. Using these video tapes, we In this paper, we make an attempt to predict the location can know cable's status, and know whether the cable is in of a cable in next frame according to some parameters dangerous. in current frame. At first, the initial condition is that Developing with examination about the Underwa...

We present an algorithm for the real-time simulation of virtual cables using inverse kinematics. A cable is modeled by consecutive cylinder segments of equal size. The segments are connected by ball joints. At every joint there is a spiral spring acting against the excursion of the joint. Given a start and an end position of the cable, the algorithm calculates the shape of the cable that leads ...

In this paper we study the problem of manipulating and transporting multiple objects on the plane using a cable attached at each end to a mobile robot. This problem is motivated by the use of boats with booms in skimming operations for cleaning oil spills or removing debris on the surface of the water. The goal in this paper is to automate the task of separating the objects of interest from a c...

This document defines a basic set of managed objects for SNMP-based management of extended QoS features of Cable Modems (CMs) and Cable Modem Termination Systems (CMTSs) conforming to the Data over Cable System (DOCSIS) specifications versions 1.1 and 2.0. Patrick & Murwin Standards Track [Page 1] RFC 4323 IPCDN DOCSIS QoS MIB January 2006

This document defines a basic set of managed objects for SNMP-based management of extended QoS features of Cable Modems (CMs) and Cable Modem Termination Systems (CMTSs) conforming to the Data over Cable System (DOCSIS) specifications versions 1.1 and 2.0. Patrick & Murwin Standards Track [Page 1] RFC 4323 IPCDN DOCSIS QoS MIB January 2006

This paper investigates the performance of the semiactive control system based on magnetorheological fluid (MR) dampers for suppressing excessive vibration of stay cable installed in cable-stayed bridges under wind load. The cable model is extracted from a 156.3 m long stay cable with high tension. The external wind load is generated from the widely used wind load spectrum such as the Kaimal sp...