Ten 35Ag-30Pd-20Au-15Cu alloys containing 0.00, 0.25, 0.50, 0.75, 1.00, 1.25, 1.50, 2.00, 4.00, or 6.00% Ga were experimentally prepared to investigate the effect of Ga on their mechanical properties in addition to their use for denture frameworks, connectors and clasps. The effect of Ga addition on the mechanical properties was marked with a significant increase in the tensile strength, 0.2% o...

Biodegradable materials are developed for designing temporary medical implants, like fixation devices for fractured bones or stents. At present, polymeric biomaterials such as poly-lactic acid (PLA) are currently used in these applications. The disadvantage of polymers is a low mechanical strength, hardness and wear resistance that is the main limitation for the use in load-bearing implants. Fo...

This paper provides a framework for optimization of Induction Hardening parameters by using Intelligent Techniques. Heat Treatment of Iron Alloy is carried out for improving Mechanical and Metallurgical properties like Ductility, Toughness, Hardness, and Tensile Strength etc. These properties play a important role for selection of material in Manufacturing Field. Induction Hardening on iron all...

The test panels obtained from Scots pine (Pinus sylvestris L.) and Eastern beech (Fagus orientalis L.) were initially adjusted to have 8%, 10%, and 12% moisture content in this study. One-component semimatte and two-component water borne varnishes were applied on the surfaces in order to investigate the effect of the type and the moisture content of the wood on the hardness and the gloss values...

Zirconia-toughened alumina (ZTA) using yttria-stabilised zirconia is a good option for ceramic-ceramic bearing couples for hip joint replacement. Gelcasting is a colloidal processing technique capable of producing complex products with a range of dimensions and materials by a relatively low-cost production process. Using gelcasting, ZTA samples were prepared, optimising the stages of fabricatio...

To investigate the effect of prepolymerization warming on composites' mechanical properties, three composites were evaluated: Clearfil Majesty (CM) (Kuraray), Z-100 (3M/ESPE), and Light-Core (LC) (Bisco). Specimens were prepared from each composite at room temperature as control and 2 higher temperatures (37°C and 54°C) to test surface hardness (SH), compressive strength (CS), and diametral ten...

Metal matrix-impregnated diamond composites are widely used in diamond tool manufacturing. In order to satisfy the increasing engineering requirements, researchers have paid more and more attention to enhancing conventional metal matrices by applying novel methods. In this work, ZrO₂ nanoparticles were introduced into the WC-bronze matrix with and without diamond grits via hot pressing to impro...

The aim of this study was to prepare Spherical agglomerates of Carbamazepine by Quesi-Emulsion Solvent Diffusion system (QESDS) with Ethanol-Chloroform-Water system. Granules were prepared by wet granulation method with different excipients.The prepared agglomerates were evaluated for flowability, compressibility, wettability, packability and solubility. Tablets were prepared and evaluated for ...

This paper attempts to investigate the influence of the microstructure and mechanical property changes on sand casting and permanent die casting alloys by grain refinement, modification combined action of both (Al– 3Ti–1B + Al–10Sr) and without grain refinement and modification effect. The microstructures of the castings are studied by optical microscopes. The microstructure and mechanical prop...

In this study, acrylated soybean oil (AESO) was used as modifying agent for DGEBF-type epoxy resin (ER). AESO was used as a co-matrix in 50 wt % with ER. Composites with ecofriendly natural fillers-banana bark and seashell were prepared. MNA was used as a hardener. Effect of banana peel (BP) and seashell (SSh) fillers on mechanical properties, such as tensile strength, elongation at break, and ...