This paper illustrates the morphing of flow architecture toward greater performance in a counterflow heat exchanger. The architecture consists of two plenums with a core of counterflow channels between them. Each stream enters one plenum and then flows in a channel that travels the core and crosses the second plenum. The volume of the heat exchanger is fixed while the volume fraction occupied b...

In the presented paper two quality parameters are used to represent the state of a heat exchanger. The remaining lifetime can be estimated by trend regression. Also of interest is the uncertainty of the predicted lifetime which is determined by the confidence interval of the parameter estimation. These algorithms developed are used in this paper in an off-line evaluation of the measurements on ...

longitudinal heat conduction is an important parameter in the cryogenic field, especially in cryogenic heat exchangers. in the present work, the parasitic effect of tube wall longitudinal heat conduction on temperature measurement has been studied in cryogenic laminar hydrogen flow. the effects of various parameters such as wall cold end temperature, wall thermal conductivity, gas volumetric fl...

The aircraft environmental control system (ECS) is a critical aircraft system, which provides the appropriate environmental conditions to ensure the safe transport of air passengers and equipment. The functionality and reliability of ECS have received increasing attention in recent years. The heat exchanger is a particularly significant component of the ECS, because its failure decreases the sy...

A geothermal direct-use project utilizes a natural resource, a flow of geothermal fluid at elevated temperatures, which is capable of providing heat and/or cooling to buildings, greenhouses, aquaculture ponds, and industrial processes. Geothermal utilization requires matching the varied needs of the user and characteristics of the resource in order to development a successful project. Each appl...

Over 85% of all new heat exchanger applications in oil refining, chemical, petro-chemical, and power generation are accommodated through the use of conventional shell and tube type heat exchangers. The fundamental basis for this statistic is shell and tube technology is a cost effective, proven solution for a wide variety of heat transfer requirements. However, there are limitations associated ...

heat exchangers (STHEs) is done by sophisticated computer software. However, a good understanding of the underlying principles of exchanger design is needed to use this software effectively. This article explains the basics of exchanger thermal design, covering such topics as: STHE components; classification of STHEs according to construction and according to service; data needed for thermal de...

The necessity of high effectiveness in a small volume has led to the development of perforated plate matrix heat exchangers (MHE) for cryogenic applications. Although the basic principles have remained the same, the techniques of fabrication and bonding have changed considerably during the last four decades. With the introduction of all metal construction, these exchangers are finding increasin...

the objective of this paper is to present a design procedure for compact plate-fin heat exchangers based on full utilization of pressure drop. since, design engineers need to indices for optimum selection of plates, an appropriate  index   is   developed  and   then based on the rapid design algorithm, developed by previous investigators, the best enveloped has been modified.  the developed ind...