A multi-zone air-handling unit was popular several decades ago due to the convenience of small sized modular units, which were inexpensive to install and easily maintained in a mechanical room. The cost and convenience proved to be of little benefit as the units perform poorly from an energy usage perspective. A “three-deck” multi-zone unit is a hybrid of its kind, and it can be very efficient ...

Recent data have radically altered the X-ray perspective on cooling flow clusters. X-ray spectra show that very little of the hot intracluster medium is cooler than about 1 keV, despite having short cooling times. In an increasing number of cooling flow clusters, the lobes of a central radio source are found to have created cavities in the hot gas. Generally, the cavities are not overpressured ...

Die casting process is used since long, but even today problems like erosion, corrosion, soldering and sticking affect die life. These dies undergo thermal cyclic loads from 70 oC to 600 oC during processing. Physical Vapor Deposition (PVD) hard coating can play an important role in such extreme applications. In the present work, we report the use of Chromium based multila...

The energy performance of buildings depends on how effectively the building envelope responds to climate. Architects, therefore, need to design building envelopes with the consideration of local climate characteristics in the early design stage. Simplified formulas were used that evaluate the heating and cooling energy demand of building envelopes, which were applied to a model building with en...

This paper describes the results of a preliminary study to determine the e€ective heating and cooling time constants of ionospheric currents in a simulated modulated HF heating, `beam painting' con®guration. It has been found that even and odd harmonics of the fundamental ELF wave used to amplitude modulate the HF heater are sourced from di€erent regions of the ionosphere which support signi®ca...

Shape-memory hacks were fabricated in a single processing step ("one-time procedure") by a combination of tensile and bending deformation of a martensitic NiTi-wire. The hacks reversibly changed curvature on heating and cooling in a reproducible manner over 50 thermal cycles. This new type of intrinsic two-way shape memory effect was studied by subjecting the hacks to a beam of high-energy sync...

For controlled environment agriculture (CEA) related facility planning and design, weather information for the specific location are required for the estimation of heating/cooling loads and design of environmental control components and systems. Summer/Winter design temperature and degree day were the traditional methods used by the engineers to estimate the annual cooling/heating load. Weather...

The cooling-flow problem is a long-standing puzzle that has received considerable recent attention, in part because the mechanism that quenches cooling flows in galaxy clusters is likely to be the same mechanism that sharply truncates the high end of the galaxy luminosity function. Most of the recent models for halting cooling in clusters have focused on AGN heating, but the actual heating mech...

ternal cooling of the leaf. If such an effect existed it should have been greatly reduced following illumination with 2,600 fc of blue light, for the blue filter (10 mm of 20 % aqueous CUSO4) reduced the external heating effect of the light markedly and should have reduced the internal heating even more. Average external leaf temperatures were as follows: white light-30.10, blue light-27.5°, da...