An experimental study that examines spatial resolution effects on the measured streamwise velocity component is presented. Normal hot-wire measurements for mean flow velocity profiles, streamwise turbulence intensity profiles in addition to their respective spectra at different levels within the turbulent boundary layers will be presented. Measurements were carried out at Reynolds number based ...

The article deals with pneumatic and hot wire anemometry measurement on subsonic axi-symmetric air ejector. Performances of the ejector with and without pulsations of primary flow are compared, measuring of characteristic pressures and mass flow rates are performed and ejector efficiency is evaluated. The pulsations of primary flow are produced by a synthetic jet generator, which is placed in t...

In an ongoing research project an autonomous underwater vehicle is to be built that will detect, localize, and avoid objects by means of a fully passive sensory system. Using hot-wire anemometry it measures local water velocities at the vehicle’s hull and thus mimics the lateral-line system of fish and many amphibians. Fish often use the lateral-line system as their only means for navigation, e...

Fine-wire thermocouples were used to measure high-frequency temperature above and within canopies and structure functions were employed to determine temperature ramp characteristics, which were used in a fundamental conservation of energy equation to estimate sensible heat flux density. Earlier experiments over dense, tall, and short canopies demonstrated that the surface renewal method works, ...

but the limbs were not affected, though there was slight loss of power in the legs. Otherwise the patient's health was very good. The cyst was allowed to refill, and a month after the exploration Dr. Amussat cauterized the interior of the tumour in the following way: The patient was seated in a chair and a long trocar passed obliquely upwards through the tumour from the inner extremity of the c...

In this paper, a fracto-metallographic analysis was performed on the cracked specimens of cold drawn pearlitic steel subjected to fatigue tests. Fatigue cracks are transcollonial and exhibit a preference for fracturing pearlitic lamellae, with non-uniform crack opening displacement values, micro-discontinuities, branchings, bifurcations and frequent local deflections that create microstructural...