A low SV causes relatively slow pyrolysis conditions at around 600°C, and produces high yields of charcoal 20-30%, large quantities of unburned tars, and a gas with high hydrocarbon content and high tar (volatile) content. A high SV causes very fast pyrolysis, producing less than 10% char-ash at 1050 C and hot gases at 1200-1400 C in the flaming pyrolysis zone. These gases then react with the r...

[1] Analysis of receiver functions from an eight-station network on the Saudi Arabian shield indicates that the Moho depths vary between 35–38 km. The crust appears to be rather felsic in nature as evidenced by Poisson’s ratios of 0.25–0.27. A prominent negative phase following the Moho conversion is suggestive of a zone of velocity inversion. Indication of mantle stratification is observed ben...

Importance of thermal radiation for transition to flashover in a compartment fire will be demonstrated. A one zone model is developed with the objective of capturing the key mechanisms responsible for the initiation of flashover, i.e. physics of flashover. Thermal radiation is shown to be a key point and the inclusion of a three-dimensional radiation model is essential in the development of an ...

Wrangellia consists largely of an oceanic plateau, a vast outpouring of basalt and more Mg-rich magma that erupted onto the ocean floor and was subsequently accreted to the western margin of the North American plate. Flood basalts form extensive sequences on Vancouver Island and are believed to have formed by melting in a mantle plume (an upwelling zone of hot mantle rock). They form the oceani...

A detailed chemical kinetic modeling approach is used to examine the phenomenon of suppression of sooting in diesel engines by the addition of oxygenated hydrocarbon species to the fuel. This suppression, which has been observed experimentally for a few years, is explained kinetically as a reduction in concentrations of soot precursors present in the hot products of a fuel-rich diesel ignition ...

The microstructure of steel is decisive for its chemical, physical and mechanical properties. Depending on the parameters characterising liquid metal as well as the parameters of the steel casting influencing the crystallisation process, the macrostructure of casts and ingots consist of three, two or only one crystallisation zone. In steel ingots, its most frequent by consist of three zones: ch...

The integration of RFID technology and mobile smart device stimulates the daily increasing popularity of mobile RFID-based applications, which makes its way to become a new hot zone for research and development. Current RFID authentication schemes are not viable to use in mobile RFID environment. The authentication schemes result in computing load to the low cost tag and provide insufficient pr...

The effect of the Superpave defined restricted zone on HMA rutting performance was evaluated. One gradation that violated the restricted zone (TRZ) and two gradations that did not violate the restricted zone (BRZ and ARZ) were evaluated. Mixes evaluated represented a range of maximum aggregate sizes (MAS), design traffic levels, and aggregate types. Three laboratory tests, Asphalt Pavement Anal...

In studies of epitaxial growth, analysis of the distribution of the areas of capture zones (i.e. proximity polygons or Voronoi tessellations with respect to island centers) is often the best way to extract the critical nucleus size i. For non-random nucleation the normalized areas s of these Voronoi cells are well described by the generalized Wigner distribution (GWD) Pβ(s) = as β exp(−bs), par...