The abrasive wear of nanocrystalline Ni–W alloys with grain sizes of 5–105 nm has been studied using Taber abrasion testing. The wear resistance of the finest grain size specimen is found to be higher than would be predicted based on hardness alone. This deviation from Archard scaling is traced to mechanically-driven structural evolution, consisting of grain growth and grain boundary relaxation...

In the present study, enamel wear against indirect composite resins was evaluated using two newly designed wear test methods: a rotating sliding wear test and a buff wear test. For the composite resins investigated in this study, their surface morphologies were examined using a scanning probe microscope after buff-polishing. After the wear tests, enamel was worn down by hard fillers that protru...

If one of the surfaces which are in touch is rough and hard, it chips the other surface due to relative motion or touching forces. The wear is called two-body abrasive wear. If there are free abrasive particles between the two bodies, the wear is called three-body abrasive wear. The free abrasive particles may be external material dust or the remains of chipping. Usually, the wear starts as a t...

The presence of oxygen in the environment in which a steel sliding system operates will promote a mild form of wear with wear debris consisting mainly of iron oxides. Of the oxidation-dominated mechanisms, mild-oxidational wear (the prefix describes the extent of oxidation and not the wear rate) has been most extensively investigated. In this paper, examples will be used to show that the wear-m...

A model of the flank wear of cutting tools is developed by using linear control theory. The flank wear is assumed to consist of a mechanically activated and a thermally activated component. The wear process is mathematically treated as a feedback process, whereby the progressive wear raises the cutting forces and temperature thereby increasing the thermally activated wear-rate, and contributes ...

© J Can Dent Assoc 2006; 72(2):155–60 This article has been peer reviewed. Bruxism is nonfunctional clenching or grinding of the teeth. It is a destructive habit that may result in tooth wear. Although research on bruxism is extensive, its etiology remains debatable. The literature suggests that bruxism is correlated with both experienced and anticipated life stress. The purpose of this report ...

This paper refines current methods for aging mountain gazelle (Gazella gazella), one of the most common species hunted by prehistoric humans in the southern Levant. Most importantly, we present a new tooth wear scheme for aging the lower deciduous fourth premolar (dP4), the lower permanentmolars (M1,M2,M3) and the lower fourth premolar (P4) of the gazelle. Broaderwear stages for completemandibl...