The plastic deformation of Ti45Zr16Be20Cu10Ni9 bulk metallic glass has been investigated by nanoindentation performed with loads ranging from 10 to 200 mN in a wide range of loading rates. The plastic flow in the alloy exhibited conspicuous serrations at low loading rates. The serrations, however, became less prominent as the rate of indentation increased. Atomic force microscopy showed a signi...

The flow-induced deformation of a membrane in a flow is studied using experimental and computational approaches in a configuration that represents the effect of the aerodynamic load on a convertible car roof. The computational method couples a commercial computational fluid dynamics code with an in-house structural code to predict membrane deformation. A converged statically deformed state, wit...

Laser-induced deformation (bending) in azo dye-doped liquid-crystal elastomer thick films is demonstrated. We directly measure the laser-power-dependent deformation-strength (driving force). The deformation-relaxation time is also measured. We have observed that it recovers within 300 ms after the excitation laser pulse is gone, this gave a constant time of 75 ms. By estimating the optical elec...

Recently, novel and uniform deformation-induced pattern transformations have been found in periodic elastomeric cellular solids upon reaching a critical value of applied load [Mullin, T., Deschanel, S., Bertoldi, K., Boyce, M.C., 2007. Pattern transformation triggered by deformation. Phys. Rev. Lett. 99, 084301; Boyce, M.C., Prange, S.M., Bertoldi, K., Deschanel, S., Mullin, T., 2008. Mechanics...

The plastic deformation behavior of twinning-induced plasticity steels of composition Fe–25Mn–3Si–3Al are investigated by means of in situ synchrotron high-energy X-ray diffraction and compared to self-consistent simulations. It is the first time the alternating interaction of {1 1 1} <1 1 0> slip and {1 1 1} <1 1 2> twinning have been directly observed in situ while undergoing uniaxial tension...

The static deformation of gravitating elastic earth model is studied in some detail. It is found that the problem becomes well posed if we discard the stress-strain relation in the liquid core. A convenient formulation, in which derivative of density does not appear, is proposed in the liquid core by introducing a new variable. Static solutions obtained by the present theory are compared with d...

Drying represents one of the oldest unit operations employed in industrial processes. Drying is viewed as a process of simultaneous heat and mass transfer. Porous Clay-like material undergoes stresses due to non-uniform distribution of temperature and moisture induced by heat and mass transfer respectively. The aim of this work is to simulate the stresses induced by heat and mass transfer durin...

Many studies monitoring the formation of martensite during the tensile deformation of austenite report data which are, in principle, affected by both the applied stress and the resulting plastic strain. It is not clear in these circumstances whether the transformation is stress induced (i.e. the stress provides a mechanical driving force) or whether the generation of defects during deformation ...

A dark soliton becomes unstable when it is incident on a background density gradient, and the induced instability results in the emission of sound. Detailed quantitative studies of sound emission are performed for various potentials, such as steps, linear ramps and gaussian traps. Continuous emission of sound is found to lead to an apparent deformation of the soliton profile. The power emitted ...

The local plasticity and associated microstructure evolution in Fe-5Mn-0.1C medium-Mn steel (wt.%) were investigated this study. Specifically, the micro-deformation mechanism during Lüders banding was characterized based on multi-scale electron backscatter diffraction measurements channeling contrast imaging. Similar to other steels, showed discontinuous macroscopic deformation, preferential pl...