We prepared 0.1 wt%-30 wt% Pd-loaded Co3O4 by a colloidal mixing method and investigated the sensing properties of a Pd-loaded Co3O4 sensor element, such as the sensor response, 90% response time, 90% recovery time, and signal-to-noise (S/N) ratio, toward low nitric oxide (NO) gas levels in the range from 50 to 200 parts per billion. The structural properties of the Pd-loaded Co3O4 powder were ...

We report directly grown strongly adherent graphene on Co3O4(111) by carbon molecular beam epitaxy (C MBE) at 850 K and density functional theory (DFT) findings that the first graphene layer is reconstructed to fit the Co3O4 surface, while subsequent layers retain normal graphene structure. This adherence to the Co3O4 structure results from partial bonding of half the carbons to top oxygens of ...

Although ZrO2 and HfO2 are, for the most part, quite similar chemically, subtle differences in their electronic structures appear to be responsible for differing MO2/Si (M = Zr, Hf) interface stabilities. To shed light on the electronic structure differences between ZrO2 and HfO2, we have conducted joint experimental and theoretical studies. Because molecular electron affinities are a sensitive...

The molecular structures, oxidation states, and reactivity of 3 and 6% CrO3/ZrO2 catalysts prepared by incipient wetness impregnation were examined under different conditions. The in situ Raman spectroscopic studies under dehydrated conditions reveal that the 3 and 6% CrO3/ZrO2 catalysts possess equal amounts of monochromate and polychromate species. Consequently, monolayer coverage on this ZrO...

Abstract—The origin of negative flat-band shift using La2O3 incorporation in HfO2 dielectrics has been extensively examined. From careful extraction of effective work function of gate electrode and fixed charges at each interface, it has been revealed that La2O3 at high-k/Si substrate or high-k/SiO2 interface has either large amount of positive fixed charges or an additional dipole of 0.36 V co...

In situ FT-IR spectroscopy was exploited to study the adsorption of CO2 and CO on commercially available yttria-stabilized ZrO2 (8 mol % Y, YSZ-8), Y2O3, and ZrO2. All three oxides were pretreated at high temperatures (1173 K) in air, which leads to effective dehydroxylation of pure ZrO2. Both Y2O3 and YSZ-8 show a much higher reactivity toward CO and CO2 adsorption than ZrO2 because of more fa...

Preliminary researches were carried out to study the effects of particle size on the wear behavior of a-C coating. The used nanoparticles are W (W-NPs), which have similar bulk hardness with ZrO2 (W: 7.5, ZrO2: 6.5, Mohs scale), but contain larger particles with the diameter of submicron and micron scale (Figure S1). The tribo-tests were performed under the same conditions with the ones used fo...

Integration of luminescent rare earth ions and iridescence into a zirconium oxide photonic material is attractive for the design of new optical devices. The free-standing chiral nematic mesoporous films of ZrO2:Eu(3+) are assembled by a hard-templating approach using nanocrystalline cellulose-templated silica. The ZrO2:Eu(3+) films show tunable optical properties. The chiral nematic structured ...

Mesostructured Co3O4/C composites of high surface area have been synthesized via a one-step replica route by co-nanocasting cobalt and carbon precursors into mesoporous silica, in which the Co3O4 nanoparticles are homogeneously dispersed in the mesoporous structure of carbon substrates. The mesostructured composites showed relatively high catalytic activities for oxygen reduction reaction (ORR)...

Double-shell cobalt monoxide (CoO) hollow particles were successfully synthesized by a facile and effective one-pot solution-based synthetic route. The inner architecture and outer structure of the double-shell CoO hollow particles could be readily created through controlling experimental parameters. A possible formation mechanism was proposed based on the experimental results. The current synt...