This study conducted cold flow experimental research on the influence of mass rate atomization characteristics screw conveyer swirl injectors in an opening environment. The Phase Doppler Particle Analyzer (PDPA) and high-speed photography were utilized to obtain data. results showed that greatly influenced establishment working injectors. design point selection exerted significant range perform...

In-situ air sparging has evolved as an innovative technique for soil and groundwater remediation impacted with volatile organic compounds (VOCs), including chlorinated solvents. These may exist as non-aqueous phase liquid (NAPL) or dissolved in groundwater. This study assessed: (1) how air injection rate affects the mass removal of dissolved phase contamination, (2) the effect of induced ground...

The use of variable-speed compressors in heat pumps and air conditioners has increased in recent years in order to improve comfort and energy efficiency. At the same time, there is a trend towards embedding more sensors in this type of equipment to facilitate real-time energy monitoring and diagnostics. Although compressor mass flow rate and power consumption are useful indices for performance ...

Numerous researches have been investigated on the mass transfer phenomena and hydrodynamics for the fluid in the vicinity of the membrane surface by the mathematical modelling and simulation. Due to complexities involved in solving transport phenomena within membranes, the application of CFD simulation study for determining the concentration polarization (CP) profile in the membrane channel is ...

This paper deals with numerical study of semi-finite incompressible flow of air over two blocks with different heights in the presence of a condensing-source, dispensing- contaminant in the flow, in both steady and unsteady states. The numerical solution of governing PDE equations are constructed by a finite-volume method applied on structured grid arrangement. The effects of air flow velocity,...

This study aims at presenting a numerical model for predicting grout flow and penetration length into the jointed rock mass using Universal Distinct Element Code (UDEC). The numerical model is validated using practical data and analytical method for grouting process. Input data for the modeling, including geomechanical parameters along with grout properties, were obtained from a case study. The...

In this paper double flow packed bed solar air heater has been investigated theoretically. The effect of air mass flow rate, porosity and different depth ratios at study state conditions on the thermal performance of a double flow packed bed solar air heater is found by using the alternative simulation system. Comparisons between the measured thermal and effective thermal efficiency of the doub...

A thermodynamic analysis of an operational 315 MW supercritical steam power plant (SPP) using the actual data is performed to assess the plant performance and identify the sites of energy losses and exergy destructions in each component of the plant. Various performance parameters such as component energy and exergy efficiencies, energy loss rate, exergy destruction rate, improvement potential ...

an optimal design and fabrication of compressors requires flow investigation through the compressor components. flow field inside the volute is fully three dimensional and turbulent. better understanding of flow mechanism leads to improve the volute design procedure. in this research the experimental and numerical flow investigation through a radial flow compressor volute are performed to recog...

In pipeline-riser systems, pressure fluctuations which result from the formation of large liquid slugs and gas surges due to operational changes or low mass flow rate from production wells and the profile of pipeline-riser systems often lead to trips at the inlet of the separator; and thereby, the problem causes a a loss of the production.In this study, on a sample deep-water oil field off the ...