Adsorption and conversion of various hydrocarbons on monolithic hydrocarbon adsorbers were studied using a new experimental model, temperature-programmed adsorption (TPA). In this study, methyl alcohol, acetone, acetaldehyde, 2,2,4-trimethylpentane, n-octane, and toluene were chosen as model hydrocarbons for cold start of a vehicle. The effect of the hydrocarbon components and oxygen concentrat...

In situ X-ray photoelectron spectroscopy (in situ XPS) was used to study the structural and catalytic properties of Pd-In near-surface intermetallic phases in correlation with previously studied PdZn and PdGa.Room temperature deposition of ∼4 monolayer equivalents (MLEs) of In metal on Pd foil and subsequent annealing to 453 K in vacuum yields a ∼1:1 Pd/In near-surface multilayer intermetallic ...

Fatty acids esters were produced from two Nigerian lauric oils, palm kernel oil and coconut oil, by transesterification of the oils with different alcohols using PS30 lipase as a catalyst. In the conversion of palm kernel oil to alkyl esters (biodiesel), ethanol gave the highest conversion of 72%, t-butanol 62%, 1-butanol 42%, n-propanol 42% and iso-propanol 24%, while only 15% methyl ester was...

This work addresses a reliable in situ transesterification process which integrates lipid extraction from wet microalgae, and its conversion to biodiesel, with a yield higher than 90 wt.%. This process enables single-step production of biodiesel from microalgae by mixing wet microalgal cells with solvent, methanol, and acid catalyst; and then heating them in one pot. The effects of reaction par...

The simultaneous esterification and transesterification of Jatropha curcas oil (JCO) was carried out in the presence of Bi2O3 (1–7 wt.%) modified La2O3 catalyst at atmospheric pressure. The catalyst were characterized by X-ray diffraction (XRD), BET surface area, desorption of CO2 (TPD-CO2) and NH3 (TPD-NH3). Under the optimal reaction condition of methanol/oil molar ratio of 15:1, 2 wt.% of ca...

Synthesis of dimethyl carbonate (DMC) from CO2 and methanol under milder reaction conditions was performed using reduced cerium oxide catalysts and reduced copper-promoted Ce oxide catalysts. Although the conversion of methanol was low (0.005-0.11%) for 2 h of reaction, DMC was synthesized as low as 353 K and at total pressure of as low as 1.3 MPa using reduced Cu-CeO2 catalyst (0.5 wt% of Cu)....

The conversion of carbon dioxide into important industrial feedstock is a subject of growing interest in modern society. A possible way to achieve this goal is by carrying out the CO2/methanol cascade reaction, allowing the recycle of CO2 using either chemical catalysts or enzymes. Efficient and selective reactions can be performed by enzymes; however, due to their low stability, immobilization...

Waste cooking oil (WCO) was used as a potential feedstock for biodiesel production. High levels of free fatty acids (9.85% w/w) in WCO made it an undesirable substrate for direct transesterification reaction. To solve this issue, a two-step process was implemented in this research. Firstly, esterification reaction was performed in presence of sulfuric acid as a common acid catalyst to reduce th...