Graft copolymerization of acrylic acid (AA) onto Poly(ethylene terephthalate) (PET) fabrics with the aid of benzoyl peroxide was carried out. The effect of polymerization parameters on the graft yield was studied. Percent grafting was enhanced significantly by increasing benzoyl peroxide (BP) concentrations up to 3.84 g/lit and then decreased upon further increase in initiator concentration. Pr...

Using a first-principle approach, we investigate the C 1s core-level shifts of poly~ethylene terephthalate!. The geometrical structure of the polymer is first fully relaxed, then the C 1s core-level shifts are obtained using an approach that includes core-hole relaxation. We compute shifts without geometry relaxation of the excited system, as well as with this relaxation, and find that one of t...

Ultrafiltration, nanofiltration membranes and feed spacers were hydrophilized with polydopamine and polydopamine-g-poly(ethylene glycol) surface coatings. The fouling propensity of modified and unmodified membranes was evaluated by short-term batch protein and bacterial adhesion tests. The fouling propensity of modified and unmodified membranes and spacers was evaluated by continuous biofouling...

During this study the formation and growth of silver chloride crystals in crazed porous polymeric matrixes of poly(ethylene terephthalate) (PET) and polypropylene (PP) were under investigation. The rate of formation and dispersity and the way AgCl particles aggregate in porous polymers were shown to be dependent on the effective volume porosity, pore dimension, and physical state of the polymer...

With increasing global consumption and their natural resistance to degradation, plastic materials and their accumulation in the environment is of increasing concern. This review aims to present a general overview of the current state of knowledge in areas that relate to biodegradation of polymers, especially poly(ethylene terephthalate) (PET). This includes an outline of the problems associated...

In this paper, we report that silver films evaporated on poly-ethylene-terephthalate (PET) substrates coated with an acrylic primer can be stretched beyond 70% without fracture. As-deposited films show a larger failure strain than annealed coatings. These observations are rationalized in light of a ductile fracture mechanism where debonding from the substrate coevolves with strain localization....

In this work we present the formation of laser induced periodic surface structures (LIPSS) on spin-coated thin films of several model aromatic polymers including poly(ethylene terephthalate), poly(trimethylene terephthalate) and poly carbonate bis-phenol A upon irradiation with femtosecond pulses of 795 and 265 nm at fluences well below the ablation threshold. LIPSS are formed with period lengt...

Microspheres of a hydrophobic and a hydrophilic poly(ether-ester) copolymer were evaluated for their in-vitro and in-vivo biocompatibility and degradation. The microspheres prior to and after sterilization were tested for in-vitro cytotoxicity. The invivo biocompatibility of the poly(ethylene glycol) terephthalate and poly(butylene terephthalate) (PEGT/PBT) microspheres was evaluated subcutaneo...

Abstract In this research, a new generation of ternary nanocomposites based on poly(ethylene terephthalate) (PET), phosphorylated chitosan and surface modified alumina nanoparticles were fabricated in four steps. The phosphorylation process was targeted for the insertion phosphorus moieties as flame retardant agent final PET nanocomposite. Likewise, environmentally friendly nano-alumina used ma...