PURPOSE The purpose of this study was to evaluate the properties of a porous zirconia scaffold coated with bioactive materials and compare the in vitro cellular behavior of MC3T3-E1 preosteoblastic cells to titanium and zirconia disks and porous zirconia scaffolds. MATERIALS AND METHODS Titanium and zirconia disks were prepared. A porous zirconia scaffold was fabricated with an open cell poly...

OBJECTIVES To compare the wear and opposing enamel wear of adjusted (A); adjusted and polished (AP); and adjusted and glazed (AG) zirconia and lithium disilicate. METHODS Specimens (n=8) were prepared of lithium disilicate (A, AP, and AG), zirconia (A, AP, and AG), veneering porcelain, and enamel (control). Surface roughness was measured for each ceramic. In vitro wear was conducted in the UA...

PURPOSE Porcelain chipping has been one of the main problems of porcelain-fused-to-zirconia restorations. This study evaluates the bond strengths of layered, pressed, and adhesively bonded porcelain to yttria-stabilized zirconia substrates that have undergone traditional preparation or gas-phase fluorination. MATERIALS AND METHODS A three-point bending test was used to evaluate the bond stren...

Nano-delivery systems for the active ingredients of pesticides can improve the utilization rates of pesticides and prolong their control effects. This is due to the nanocarrier envelope and controlled release function. However, particles containing active ingredients in controlled release pesticide formulations are generally large and have wide size distributions. There have been limited studie...

nano-hydroxyapatite/gelatin (nha/ge) microspheres are currently used in bone tissue engineering as bone filler. in this  study, the effect of fabrication process parameters on the particle size of nano-hydroxyapatite/gelatinmicrospheres was investigated. the nha/ge microspheres were fabricated using water in oil emulsion. in order to design an experimental design, a surface response model with ...

This paper presents the application of the Taguchi experimental design in developing nanostructured yittria stabilized zirconia (YSZ) coatings by plasma spraying process. This paper depicts dependence of adhesion strength of as-sprayed nanostructured YSZ coatings on various process parameters, and effect of those process parameters on performance output has been studied using Taguchi's L16 orth...

In recent years many works are aimed at finding a method of controllable switching between hydrophilicity and hydrophobicity of a surface. The hydrophilic surface state is generally determined by its energy. Change in the surface energy can be realized in several different ways. Here we report the ability to control the surface wettability of zirconium dioxide nano-coatings by changing the comp...

OBJECTIVE To test whether or not pink veneering of the submucosal part of zirconia abutments influences clinical, microbiological and histological outcomes of cemented implant-supported single crowns (ISSC). MATERIALS AND METHODS A total of 20 patients with one single-tooth implant in the esthetic zone were included. Implants were randomly restored with either pink-veneered zirconia abutments...

Introduction and Strategy Discovery of the extraordinary activity of sulfated zirconia for n-butane isomerization below 373K has led to numerous efforts to investigate and correlate structure, acidity, and reactivity of this material. Although a large data set has been obtained from powdered sulfated zirconia no consistent picture has evolved that satisfactorily describes acidity and reactivity...

Zirconia (ZrO2) is a ceramic material with adequate mechanical properties for manufacturing of medical devices. Zirconia stabilized with Y2O3 has the best properties for these applications. When a stress occurs on a ZrO2 surface, a crystalline modification opposes the propagation of cracks. Compression resistance of ZrO2 is about 2000 MPa. Orthopedic research led to this material being proposed...