Soft tissue filler injection has been a very common procedure worldwide since filler injection was first introduced for soft tissue augmentation. Currently, filler is used in various medical fields with satisfactory results, but the number of complications is increasing due to the increased use of filler. The complications after filler injection can occur at any time after the procedure, early ...

This study examined the effects of monomer composition, original filler content, and application of centrifugal force on the resulting filler loading of composites. Either Bis-MPEPP or UDMA was mixed with TEGDMA at a molar ratio of 1 : 1. Silane-treated silica (14-20 wt%) was added to each mixture. After the mixtures were centrifuged and light-polymerized, rate of increase was determined as the...

The possibility of alloying can not be avoided at the interface between molten brazing filler metal and base metal in brazing, so the wettability of brazing filler metal can not be easily explained theoretically. We used the original apparatus for wettability test and investigated the relation between the wettability of brazing filler metals of Ag-P-Cu and Ag-Cu-Zn-Cd systems on copper and the ...

We investigated single application of pastes containing a surface reaction-type pre-reacted glass-ionomer (S-PRG) filler on enamel demineralization. Human enamel blocks were polished using pastes containing S-PRG filler (0, 5, and 30%) and immersed in demineralizing solution for 5 days with daily change of solutions. The pH measurement and nanoindentation testing was carried out during the imme...

Chitosan/multiwalled carbon nanotube nanocomposite has been successfully synthesized by the chemical method. The prepared nanocomposite was characterized using XRD, FTIR and HRTEM. The XRD pattern of the nanocomposite shows the presence of planes corresponding to both chitosan and MWCNT and the absence of impurity phases. The semi-crystalline nature of chitosan is also evident from the obtained...

We develop a facile, effective and filter free infiltration method to fabricate high performance, freestanding and superthin epoxy nanocomposite films with directly synthesized Sing-Walled Carbon Nanotubes (SWNTs) film as reinforcement skeleton. It is found that the thicknesses of the nanocomposite films can be easily controlled in the range of 0.5-3 μm by dripping target amount of acetone dilu...

This study aims to present the influence of Zinc Oxide (ZnO) filler on dielectric properties two types commercial potting compounds. For this purpose, methods spectroscopy were used measure changes in responses polyurethane and epoxy by 1.0 wt. % ZnO over frequency temperature range, respectively. Two representatives mixtures (VUKOL 022 EPOXYLITE 3750 LV), that are commercially industry for fil...

Abstract Epoxy resin (EP) materials are frequently used in high voltage power equipment because of their excellent electricity, force, and heat properties. However, under the condition DC voltage, surface EP insulation material is more likely to accumulate charge, which distorts nearby electric field causes flashover along surface. In this article, a nanocomposite coating was prepared by sprayi...