The superelastic behavior of coil springs of a Ti-Ni shape memory alloy was investigated using loading-unloading cycling tests under isothemal temperatures. The effects of the Ni content and shape memory treatment temperatures on the cyclic behavior in the superelastic deformation were investigated. The deformation behavior within the elastic region of the parent phase scarcely changes during t...

An experimental relationship between superconductivity, magnetism and localization is explored in short-wavelength (148 G A < 40A) sputtered Mo/Ni superlattices. A crossover to a superconducting state is observed for A < 9A consistent with the observed paramagnetic behavior when the Ni strata are four atomic layers thick, or less. All samples show localization effects at helium temperatures and...

In this study, inductive coupled plasma-optical emission spectroscopy (ICP-OES) is employed for the evaluation of soil pollution for selected metals in the Vanderbijlpark area of South Africa. Soil samples investigated were collected from five different sites in the city based on their proximity to the industrial areas of Vanderbijlpark. Soil samples were collected from close to traffic robots,...

The causes of liquation cracking in the heat-affected zone (HAZ) of a cast Mar-M004 superalloy weld were investigated. X-ray diffraction (XRD), electron probe microanalyzer (EPMA), and electron backscatter diffraction (EBSD) were applied to identify the final microconstituents at the solidification boundaries of the cast alloy. Fine borides and lamellar eutectics were present in front of some γ...

A new maraging stainless steel with superior strength-toughness-corrosion synergy has been developed based on an innovative concept of alloy design. The high strength-toughness combination is achieved by forming dispersive nano-sized intermetallic compounds in the soft lath martensitic matrix with a slight amount of residual austenite. The good corrosion resistance is guaranteed by exactly cont...

The Ti-6Al-6Mo alloy was arc-melted eight times from pure Ti, Al, and Mo. The Ti6Al-6Mo were analyzed by using an optical microscope, SEM-EDS, XRD and Vickers Hardness Tester. Corrosion test was performed by using Hank’s solution at 37 °C and pH 7.4. The optical micrograph showed a similar structure of this alloy. The microstructure of Ti 6Al6Mo was basketweave with  lath. The map of Ti, Al an...

The effect of Cu on the localized corrosion of Ni-Cr-Mo alloys has been investigated in hot saline solutions by comparing the behavior of N06059 and N06200 alloys, using electrochemical and surface analytical techniques. No measurable effect of copper on anodic film growth kinetics and passive film properties was detected and the breakdown and repassivation potentials of the alloys were very si...

1 his paper provides a U-J;P,G work for selecting heat exchangers materials especially those used in nuclear power plants. Typical examples of materials selection for heat exchanger tubing of nuclear power plants and condensers are presented. The paper brings out also, the importance of continued intensive R & D in materials in order to enhance the reliability and reduce cost by improving upon ...