Heat transfer improvement in circular pipe by using nanofluid and twisted tape is presented in this review paper. Experimental and numerical studies are incorporated involving both the range of turbulent and laminar flow. Effect of type and volume fraction of nanofluid on performance of heat transfer was referred along with the length and twist ratio of the tape through the pipe on heat transfe...

The outlet feeder pipe thinning in a PHWR (Pressurized Heavy Water Reactor) is caused by high pressure steam flow inside the pipe, which is a well known degradation mechanism called FAC (Flow Assisted Corrosion). In order to monitor the degradation, the thickness of the outlet bends closed to the exit of the pressure tube should be measured and analyzed at every official overhaul. This paper de...

The outlet feeder pipe thinning in a PHWR (Pressurized Heavy Water Reactor) is caused by a high pressure steam flow inside the pipe, which is a well known degradation mechanism called a FAC (Flow Assisted Corrosion). In order to monitor the degradation, the thickness of the outlet bends close to the exit of the pressure tube should be measured and analyzed at every official overhaul. This paper...

ÐThe unsteady ̄ow of blood in a straight, long, rigid pipe, driven by an oscillatory pressure gradient is studied. Three di€erent non±newtonian models for blood are considered and compared. One of them turns out to o€er the best ®t of experimental data, when the rheological parameters are suitably ®xed. Numerical results are obtained by a spectral collocation method in space and the implicit tr...

A computational fluid dynamics (CFD) model of a railway culvert was established based on the two-phase flow theory to investigate wind-blown sand transport and sedimentation in around culvert. Then field accumulation distribution particles were analyzed through numerical simulation. The results show that can be divided into deceleration, acceleration, vortex areas. curve horizontal wind speed a...

Nowadays, UnderBalanced Drilling (UBD) technology is widely applicable in the petroleum industry due to its advantages to an overbalanced drilling operation. UBD success depends on maintaining the drilling fluid circulating pressure below the reservoir pore pressure during operations. One of the main prerequisites of a successful UBD operation is the correct estimation of the pressure profi...

This study aimed at linear stability analysis of the stratified two-phase liquid-gas flow in a horizontal pipe. First, equations governing the linear stability of flow in each phase and boundary conditions were obtained. The governing equations were eigenvalue Orr Sommerfeld equations which are difficult and stiff problems to solve. After obtaining the velocity profiles of the gas and liquid ph...

An automated algorithm based on the dynamic hydrological and hydraulic simulation modules in Storm Water Management Model (SWMM) was developed to aid the design of storm sewer networks, provided that a layout is given. Numerical performance of the proposed algorithm was compared with the existing design methods with two application cases. The automated computation process of the sewer network d...