This paper proposes a robust design scheme for the control of surge phenomenon appearing in a centrifugal compressor. It is known the surge instability in compressor might lead to reduce the operating efficiency and even damage the machinery while both of unstable compressor characteristics and compressor load torque are hard to exactly measure in the practical application. Based on the assumpt...

The presence of liquid refrigerant in the compressor cylinder during operation, or liquid slugging, is one of the most common causes of failure in reciprocating compressors. We propose to detect this fault by analyzing the electrical current flowing into the compressor and identifying the change in the load on the motor caused by the presence of liquid in the compressor cylinder. Two different ...

Designing multipliers that are of high-speed, low power, and regular in layout are of substantial research interest. Speed of the multiplier can be increased by reducing the generated partial products. Many attempts have been made to reduce the number of partial products generated in a multiplication process one of them is Wallace tree multiplier. Wallace Tree CSA structures have been used to s...

The major problems encountered in a reciprocating compressor are because of the valve failure .The other problem of leakage past the piston because of the worn out piston rings has also been placed in the reciprocating compressor. Pressure pulsations generated inside the piping of a reciprocating compressor may be taken as one of the tool for diagnosing the nature of fault inside the compressor...

Refrigerant mass flow rate is an important measurement for monitoring equipment performance and enabling fault detection and diagnostics. However, a traditional mass flow meter is expensive to purchase and install. A virtual refrigerant mass flow sensor (VRMF) uses a mathematical model to estimate flow rate using low-cost measurements and can potentially be implemented at low cost. This study e...

This paper compares the results from a study conducted at Iowa Energy Center’s Energy Resource Station with EnergyPlus simulation results. The building consists of controlled test rooms, dedicated air handling units and air-cooled chillers for the purpose of obtaining quality data suitable for empirical validation studies. Weather data were also collected at the facility and used for the simula...

In this paper we propose a hybrid heuristic solution procedure for fuel cost minimization on gas transmission systems with a cyclic network topology, that is, networks with at least one cycle containing two or more compressor station arcs. Our heuristic solution methodology is based on a two-stage iterative procedure. In a particular iteration, at a first stage, gas flow variables are fixed in ...

As an alternative to the construction of new infrastructure, repurposing existing natural gas pipelines for hydrogen transportation has been identified as a low-cost strategy substituting with in wake energy transition. In line that, 342 km, 36″ pipeline was used this study simulate some technical implications delivering same amount different blends and hydrogen, 100% hydrogen. Preliminary find...

Results of a high-speed 10-stage axial-flow compressor test involving overall compressor and individual stage performance while stalling and operating in quasi-steady rotating stall are described. Test procedures and data acquisition methods used to obtain the dynamic stalling and quasi-steady in-stall data are explained. Unstalled and in-stall time-averaged data obtained from the compressor op...