We propose a mechanism previously developed as a hypothetical cause of the initiation of subduction in the Earth's mantle, to describe a situation where such subduction may occur transiently, at irregular intervals of time. It has been suggested that tectonics on Venus may be described by such a scenario. In our model, a subduction event is followed by resumption of high Rayleigh number mantle ...

Microcompression tests were performed on the Al/Nb multilayers of incoherent interfaces with the layer thicknesses of 5 nm Al/5 nm Nb and 50 nm Al/50 nm Nb. The Al-Nb multilayers showed increase in strength as the layer thickness was reduced; the average flow stresses at 5% plastic strain from the 5 nm Al/5 nm Nb and 50 nm Al/50 nm Nb layer thickness specimens were determined to be 2.1 GPa and ...

The deformation of polycrystalline beryllium to strains of 60.8 pct in uniaxial tension and compression was studied by neutron diffraction and modeled using an elasto-plastic self-consistent (EPSC) model. The beryllium response is asymmetric with respect to tension and compression in both the macroscopic behavior, as displayed in the stress/strain curve, and the microscopic lattice response. Th...

Abstract The expansion induced by cold working is a common process that generates residual stresses. It used when fatigue damage accumulation and life reduction of aluminum alloy perforated plates an issue in the aeronautics industry. This attractive solution to extend lifetime these structures. aims at generating stresses increases thereby strength hollow parts including with holes commonly ma...

Plastic shrinkage cracking is a problem for the service life, aesthetics and durability of concrete members. It occurs when tensile stresses are induced in fresh concrete, through plastic that restrained. caused by negative capillary pressure build-up, but can be controlled to prevent shrinkage. In this paper, control using high-capacity sensors explored. The behaviour self-compacting mix desig...

A study of the mechanical behaviour of a composite ®lm-substrate material during the hardness test is undertaken. An analytical calculation is proposed applying the kinematic model to the case of the coated spherical cavity problem. The aim of this paper is to discuss the parameters that in ̄uence the mechanical behaviour, in order to understand the observed experimental results. The parameters ...

Cyclic compressive loading tests were carried out on bovine femoral bones at body temperature (37 °C), with varying mean stresses (-55 to -80 MPa) and loading frequencies (0.5-5 Hz). At various times, the cyclic loading was interrupted to carry out high-energy X-ray scattering measurements of the internal strains developing in the hydroxyapatite (HAP) platelets and the collagen fibrils. The res...

Asymptotic near-tip fields are analyzed for a plane strain Mode I crack propagating dynamically in non-associative elastic–plastic solids of the Drucker–Prager type with an isotropic linear strain hardening response. Eigen solutions are obtained over a range of material parameters and crack speeds, based on the assumption that asymptotic solutions are variable-separable and fully continuous. A ...

Stress-induced viscous flow is the characteristic of atomic movements during plastic deformation of metallic glasses in the absence of substantial temperature increase, which suggests that stress state plays an important role in mechanically induced crystallization in a metallic glass. However, it is poorly understood. Here, we report on the stress-induced localized crystallization in individua...

We present a numerical study of the mechanical response of a 2D Lennard-Jones amorphous solid under steady quasi-static and athermal shear. We focus here on the evolution of local stress components. While the local stress is usually taken as an order parameter in the description of the rheological behaviour of complex fluids, and for plasticity in glasses, we show here that the knowledge of loc...