Energy harvesting technologies that are engineered to miniature sizes, while still increasing the power delivered to wireless electronics, (1, 2) portable devices, stretchable electronics, (3) and implantable biosensors, (4, 5) are strongly desired. Piezoelectric nanowire- and nanofiber-based generators have potential uses for powering such devices through a conversion of mechanical energy into...

Load-depth curves of an unpoled Lead Zirconate Titanate (PZT) film composite as a function of temperature were measured by nanoindentation technique. Its reduce modulus and hardness were calculated by the typical Oliver-Pharr method. Then the true modulus and hardness of the PZT film were assessed by decoupling the influence of substrate using methods proposed by Zhou et al. and Korsunsky et al...

This paper proposes a stripe-PZT sensor-based baseline-free crack diagnosis technique in the heat affected zone (HAZ) of a structure with a welded stiffener. The proposed technique enables one to identify and localize a crack in the HAZ using only current data measured using a stripe-PZT sensor. The use of the stripe-PZT sensor makes it possible to significantly improve the applicability to rea...

Abstract − A new cutting device driven by an enlargement mechanism with a PZT drive has been developed to realize positioning the cutting tool from nm to mm. In this study, the mechanical principal of a newly developed enlargement mechanism consisting of fluid chamber, a PZT device, and cutting tool stage is reported. The basic performances of the developed mechanism are also evaluated. This de...

MEMS micropumps, based on PZT membranes have been designed and fabricated at the Microtechnology Laboratory of the University of Minnesota for use in fluid flow control, and as chemical and pressure sensors. Design, fabrication and numerical analyses of the PZT cantilever beams were presented at the MSM99, and are now extended to new MEMS devices; specifically reactive ion etched (RIE) bulk mic...

$! A summary of the work recently carried out on the morphotropic phase boundary (MPB) of PZT is presented. By means of x-ray powder diffraction on ceramic samples of excellent quality, the MPB has been successfully characterized by changing temperature in a series of closely spaced compositions. As a result, an unexpected monoclinic phase has been found to exist in between the well-known tetra...

Piezoelectric diaphragms are used as synthetic jets because of their size, rapid time response, and relatively low power consumption. Among the piezoelectric diaphragms used are unimorphs and Bimorphs. In this study, a bimorph diaphragm, a thin Unimorph pre-stressed device and a Radial Field Diaphragm (RFD) are compared. A bimorph consists of two bonded PZT discs, a thin Unimorph pre-stressed d...

This paper discusses the controller design of a PZTactuated suspension dual-stage servo system in hard disk drives. The proposed control structure includes an active vibration damping control loop and a trackfollowing control loop. The vibration damping control loop, which runs at a faster rate than the trackfollowing control loop, utilizes a PZT element on a PZT-actuated suspension as a vibrat...

Abaqus/Standard simulation of Lamb waves in smart composite plates is investigated for detecting delamination type damage. Composite plates typical of aerospace structures are used and a PZT actuator is surface bonded to excite Lamb waves. Abaqus model of composite plate uses layered solid elements. Piezoelectric (PZT-5H) actuator is modeled using piezoelectric elements that have both displacem...

As an outstanding member in the oxide nanowire family, ZnO nanowire is widely studied for its optical, semiconductive, and piezoelectric properties. PbZrxTi1–xO3 (PZT), usually in the form of polycrystalline thin films, is known for its high piezoelectric coefficient and is an ideal material as actuator. In this review, we first briefly introduce the rational growth of ZnO and PZT nanowire arra...